-
### The problem
With the minimum firmware set to 0.14 we can no longer add or control the hypercube, the vendor has no plans to update the firmware please roll back the firmware minimum version or pu…
-
Would love to get this controller’s firmware updated to use it as a gradient strip. I would need to download it manually and then upload via WLED as there is no way to connect the controller to a PC. …
-
https://github.com/Aircoookie/WLED
-
### The problem
Not sure if this goes here or to WLED..
I'm running WLED 0.15.0-b4 on an ESP02 (Athom controller). The device works OK however generates errors on every action, both in the UI …
-
### What happened?
HA detected WLED 14.2 on Dig2Go controller. After installing this to any controllers, they stop working (stop lighting attached lights).
### To Reproduce Bug
1. Setup Dig2Go con…
-
I recently ordered two "WLED ESP32 Music Addressable LED Strip Controller".
On your [project page](https://de.athom.tech/blank-1/wled-esp32-music-addressable-led-strip-controller)
you're referring…
-
### The problem
I just upgraded to HA Core to 9.1 and WLED running on version 0.14.4 and the WLED integration not working.
I tried to delete the integration and try to add the integration again. W…
-
WLED is installed on a wemos minid1 device.
With version 0.13.3 it's working fine but with version 0.14 is rebooting after few seconds of working ambilight.
Should i change some config in prisma…
-
### The problem
When using a WLED host with more than one GPIO output, and using the "Make a segment for each output" option, Home Assistant still only imports the FIRST segment, leaving any addition…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Describe the solution you'd like
It would be fantastic if OpenDTU communicated whenever there is a new firmware …