-
ZMK firmware ( for seeed Xiao BLE / nRF52940 )
Not fully solidified yet, but a default will remain present at:
https://github.com/DaneEvans/zmk-config
Please link from your readme @sebastian-st…
-
I am really interested to Build this Keeb. It would be great if you can make ZMK firmware since I use wireless keeb. Can you please make a ZMK firmware for this keeb?
-
I made [ZMK](https://zmk.dev) firmware for the Keyboard, in case anybody wants to do a wireless version. This one is for the [Puchi BLE](https://keycapsss.com/keyboard-parts/mcu-controller/202/puchi-b…
-
I can't leave an issue on your fork, so I thought I'd do it here:
Have you gotten the PAW3395 working?
Where did the registers data in paw3395_priv.c come from? Did you analyze the traffic on a mo…
-
I created the following configuration:
https://github.com/KinesisCorporation/Adv360-Pro-ZMK/blob/e1fad2719ca14c0dc6b394e6b3cfcd36c77c492b/config/adv360.keymap
I am using the homerowmods to have e…
-
https://sunaku.github.io/moergo-glove80-keyboard.html
-
# キーボードの構成案
## Firmware
- qmk firmware
- AVR, ARM対応
- BluetoothはRN-42とnRF51822のみ対応
- ZMK Firmware
- kmk firmware
- ESP32対応
- Bluetoothも使える模様
## マイコン
ESP32-S3
## Bluetoot…
-
Hi there!
**tldr: Would it be possible to add support for any keaboards (not just ZMK) to keymap-editor by taking advantage of [kanata](https://github.com/jtroo/kanata) (or another similar tool)?**…
vsisl updated
1 month ago
-
Hi there,
I printed out and built the board from jlcpcb and am trying to get it to work with a nice!nano instead of the bluemicro, but I'm running into problems getting the firmware to work exactly…
-
This week, I did some tests on my ESP32-S3 (ESP32-S3R2) corne/corneish clone with the ZMK firmware.
- 16M SPI FLASH
- 2M Internal PRAM
The positive outcome is that the ESP32-S3 SoC can run ZMK …