Created by: Angelo Jacobo
Date: October 28,2021
Two ways to run this design on your ULX3S FPGA Board:
git clone https://github.com/AngeloJacobo/ULX3S_FPGA_Camera_Streaming.git
OV7670_ULX3S.ice
Tools>Build
Tools>Upload
git clone https://github.com/AngeloJacobo/ULX3S_FPGA_Camera_Streaming.git
make sram
(or make flash
if you want to download it directly to flash)oss-cad-suite
that matches your OSyosys
, nextpnr-ecp5
, and fujprog
on bash. If command not found
, just add the directories of the oss-cad-suite/bin
, oss-cad-suite/lib
, and oss-cad-suite/py3bin
to PATH. This project is ported from my previous design FPGA_OV7670_Camera_Interface that uses Spartan 6 FPGA Board. This design uses an HDMI interface instead of VGA. The OV7670 camera is a 0.3 Megapixel camera(640x480 @ 30fps). Data pixels are stored to SDRAM and retrieved by the HDMI which will then be displayed on the monitor.
btn3
- increase brightnessbtn4
- decrease brightnessbtn6
- increase contrastbtn5
- decrease contrastSupport these open-source projects by donating
Connect with me at my linkedin: https://www.linkedin.com/in/angelo-jacobo/