Dhondtguido CalculiX issues

Dhondtguido / CalculiX

This repository contains the source files of CalculiX, a three-dimensional Finite Element Program (www.calculix.de).

GNU General Public License v2.0

75 stars 19 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Multiplicative split of the deformation gradient for thermal expansion

#93 felixR96 opened 1 week ago
0
Fix multiple typos in the CalculiX User's Manual

#92 FEA-eng opened 1 week ago
0
Mistake in the documentation describing convergence criteria

#91 FEA-eng opened 1 week ago
0
No simple calculation of T or Doppel T beam with beam elements b31 or b32

#90 stefano2734 opened 1 month ago
0
write correct material for each layer to frd in a layered hex

#89 wr1 opened 1 month ago
0
C3D8I fails patch test

#88 victorkemp opened 2 months ago
1
Eigenvalues of shell first order not good in relation to other codes by adapy fem verification project

#87 stefano2734 opened 2 months ago
3
Visualisation and Fatigue evaluation Enhancement

#86 CAE4U opened 3 months ago
0
Default compressibility coefficients for OGDEN N3 Hyperelastic.

#85 disla2 opened 3 months ago
0
Calling user subroutines in shared libraries

#84 MojtabaFarrokh opened 4 months ago
1
TIED contact and beam won’t converge in CCX 2.17-2.21

#83 victorkemp opened 4 months ago
0
create nset from elset

#82 Kankreu opened 4 months ago
0
Error executing the attached files

#81 anoopngmys opened 5 months ago
6
Support VTK/VTU/PVD result files

#80 lcheng9 closed 5 months ago
4
Rotations bug. 360º

#79 disla2 opened 5 months ago
0
Spell fixes

#78 nileshpatra closed 3 weeks ago
1
Fixup implicit-function-declaration warnings

#77 nileshpatra closed 2 hours ago
2
Pyramid elements C3D5 and C3D13

#76 3rav opened 7 months ago
2
More info if error eqspacednodes.f

#75 3rav opened 7 months ago
0
First buckling mode skipped when applied load is much bigger than buckling load

#74 FEA-eng opened 7 months ago
1
EVOL doesn't change with deformation

#73 FEA-eng opened 7 months ago
0
Save CalculiX [ccx] simulation results in several csv files, based on variable, set and timestep

#72 efirvida opened 8 months ago
2
Invalid value for *SECTION PRINT

#71 3rav opened 8 months ago
1
Error with *CONDUCTIVITY,TYPE=ORTHO and *SECTION PRINT

#70 3rav opened 8 months ago
2
Wrong displacement for beam with a single rotational DOF constraint.

#69 victorkemp opened 8 months ago
0
Bug for US3 element in *STEADY STATE DYNAMICS

#68 GiuCre opened 8 months ago
2
Bug: *TEMPERATURE and 2 STEPS (2.20 OK, 2.21 error)

#67 3rav opened 8 months ago
0
possible bugs in *Equation and remove (Beam element)

#66 xyont closed 9 months ago
1
The need for a CalculiX documentation repository

#65 FEA-eng opened 9 months ago
0
Inconsistent result with CalculiX on a shell model of a plate in bending

#64 tcoff27 opened 9 months ago
17
Initial velocity is not transferred to the expanded nodes in dynamic analyses

#63 FEA-eng opened 9 months ago
1
*NODE PRINT/ *EL PRINT dat file output impacting subsequent steps

#62 dgiljohann opened 10 months ago
0
*NODE PRINT / *EL PRINT impacting dat file output of subsequent steps

#61 dgiljohann opened 10 months ago
0
Dynamic , Explicit. Material wave propagation & Courant number in mmgs units

#60 disla2 opened 10 months ago
0
Rigid body constraint doesn't work with shell, axisymmetric and plane stress/strain elements in explicit dynamics

#59 FEA-eng opened 10 months ago
2
Status file output in explicit dynamics

#58 FEA-eng opened 10 months ago
1
Changes in *BUCKLE definition

#57 lucas-bueno777 opened 11 months ago
1
BUG: CONTACT ELEMENTS breaks displacement on composites.

#56 victorkemp opened 12 months ago
0
*restart, write + overlay bug

#55 disla2 opened 1 year ago
0
Contact element file jobname.cel truncated to 33 characters.

#54 victorkemp opened 1 year ago
0
Bugfix: Non-linear SPRING1 elements in springs.f: "if(ncmat_.lt.3) then" in line 227

#53 dgiljohann opened 1 year ago
0
Non-linear SPRING1 elements not identified

#52 dgiljohann opened 1 year ago
0
Slender beams go wrong with Pastix

#51 victorkemp opened 1 year ago
3
_set_output_format(_TWO_DIGIT_EXPONENT); doesn't compile in MinGW64

#50 victorkemp opened 1 year ago
0
Bugfix: Zero coefficient with 2 rot DOF boundary conditions

#49 victorkemp closed 8 months ago
0
Bugfix: Wrong prescribed displacement on transformed shell midsurface nodes

#48 victorkemp closed 8 months ago
1
Bugfix: Other elements with composites

#47 victorkemp closed 1 year ago
1
Bugfix: *NORMAL on beams and truss-beam disconnection

#46 victorkemp opened 1 year ago
0
Bugfix: Normal in direction 1 has zero size.

#45 victorkemp closed 8 months ago
3
Bugfix: Buckling factors less than 1

#44 victorkemp opened 1 year ago
1