GlenNicholls solar_tracking_project issues

GlenNicholls / solar_tracking_project

This is the the repository for our solar tracking capstone project.

2 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Update README.md

#107 GlenNicholls opened 1 year ago
2
[SYS] Breakout DS3231 package into its own repo

#106 GlenNicholls opened 5 years ago
0
[PISW] Menu prompts to continue can be cleaned up

#105 GlenNicholls opened 5 years ago
1
[PCB!!!!!!!!!] Graeme, this is fucking urgent!!!!!

#104 GlenNicholls closed 5 years ago
3
[PISW] Set up notifications for solar track events and system faults

#103 GlenNicholls opened 5 years ago
0
[PISW] Thank god I caught this

#102 GlenNicholls opened 5 years ago
5
[PISW] When motors aren't powered up and calibration is initiated, software hangs

#101 GlenNicholls opened 5 years ago
1
[PISW] Parse datetime object in datetime.now() to return just date instead of date/time

#100 GlenNicholls opened 5 years ago
0
[PISW] Bug in next position calculation for open loop menu

#99 GlenNicholls opened 5 years ago
1
[PISW] Add compatibility for continuous tracking of sun sensors

#98 GlenNicholls closed 5 years ago
1
[PISW] Limit sw ints cause mount to overshoot if it misses edge of next interrupt

#97 GlenNicholls closed 5 years ago
0
[PISW] Create continuous move for the calibration instead of stepping x deg

#96 GlenNicholls closed 5 years ago
0
[HW] ADC ch 2 curr. amp has intermittent gnd

#95 graemeDnf opened 5 years ago
4
[PCB] Make unique connectors for all external interfaces...

#94 GlenNicholls opened 5 years ago
0
[PISW] Test fails when doing fresh OS install with all software

#93 GlenNicholls opened 5 years ago
0
[SYS] Add config steps to README

#92 GlenNicholls opened 5 years ago
1
[PISW] Change dataframe index to time

#91 GlenNicholls opened 5 years ago
2
[PISW] Condense functions for log level settings

#90 GlenNicholls opened 5 years ago
0
[PISW] Add verbosity support

#89 GlenNicholls opened 5 years ago
0
[PISW] Add support for full RTC timekeeping

#88 GlenNicholls opened 5 years ago
0
[PCB] Move pi hat USB header so lip of physical hardware is over the edge of the board

#87 GlenNicholls opened 5 years ago
0
[PISW] Add limits to how much sun sensor can adjust system

#86 GlenNicholls closed 5 years ago
3
[PISW] Add error checking for calibration so system doesn't get stuck when motors don't move

#85 GlenNicholls closed 5 years ago
1
[PISW] Add menu to manually set pi time

#84 GlenNicholls closed 5 years ago
1
[PISW] Add user error for sim menu

#83 GlenNicholls closed 5 years ago
1
[DOCS] Compile all research from SharePoint

#82 GlenNicholls opened 6 years ago
0
[PISW] Change dataframe to operate on DataFrame in code, not pickle file

#81 GlenNicholls closed 5 years ago
1
[PISW] Add lock error checking in open loop tracking mode

#80 GlenNicholls closed 6 years ago
2
[SYS] Pi date and time do not update automatically on school network

#79 GlenNicholls closed 5 years ago
1
[PISW] Add limit switch INTs to halt motors in stepper motor class

#78 GlenNicholls closed 6 years ago
1
[SYS] Update software flow charts

#77 GlenNicholls closed 5 years ago
1
[PISW] Add finer control to main app

#76 GlenNicholls closed 5 years ago
0
[HARDWARE] all of it is broken

#75 GlenNicholls closed 6 years ago
1
[PISW] Add dataframe class

#74 GlenNicholls closed 6 years ago
1
[PISW] Add file parser for pins and state

#73 GlenNicholls opened 6 years ago
1
[PCB] Add missing connections for motor control

#72 GlenNicholls closed 6 years ago
1
[PISW] ADC object not callable in runner/main.py

#71 GlenNicholls closed 6 years ago
1
[PCB] LED 2 silkscreen shows wrong orientation

#70 GlenNicholls closed 5 years ago
1
[PCB] Dev mode and FAULT pins of the attiny never go low due to level shifter

#69 GlenNicholls closed 5 years ago
7
[PISW] Consider using GPIO.BOARD for pin numbering

#68 GlenNicholls opened 6 years ago
1
[PISW] Divide by zero is possible in sun sensor logic

#67 GlenNicholls closed 6 years ago
2
[PCB] Consider INA219 if we can't get INA215 working properly

#66 GlenNicholls closed 5 years ago
6
[PCB] RTC battery ground needs to be connected to system ground

#65 GlenNicholls closed 6 years ago
0
[PISW] Avoid using python keywords for variables

#64 GlenNicholls opened 6 years ago
0
[PISW] Abstract pin definitions to top level

#63 GlenNicholls closed 6 years ago
1
[PISW] Make flash gui

#62 GlenNicholls closed 6 years ago
2
[SYS] Develop test plan

#61 GlenNicholls closed 5 years ago
1
[PCB] Change LED resistors to ~350ohm, this thing is going to blind me

#60 GlenNicholls closed 6 years ago
1
[PCB] Remove diode D4

#59 GlenNicholls closed 6 years ago
1
[PCB] Break out power to header

#58 GlenNicholls closed 6 years ago
1