If you don't already have one, you can buy the ProtoCentral MAX30205 breakout board from: ProtoCentral
The QWIIC-compatible ProtoCentral MAX30205 breakout board is a wearable human body temperature sensor that reads with an accuracy of +/- 0.1 °C.This is a digital I2C-based sensor, so an ADC would not be required to read this sensor.
In addition, this version of the board is round and designed to be be directly wearable by exposing an Aluminium surface. The alumnium-base PCB helps in easy thermal conduction to make sure most of the heat gets transferred to the sensor, resulting in more accurate readings. The top side of this PCB is encapsulated in clear epoxy resin to make it waterproof.
Unlike our previous MAX30205 breakout board, what makes it more wearable and fit for human body measurements is the use of a medical-grade biocompatible, flexible cable that does not irritate the skin.
Wire the MAX30205 breakout board to an Arduino Uno(or equivalent) using the following connections.
Arduino | MAX30205 Breakout board |
---|---|
5v | Vin (3.3V is also supported, change solder jumper behind the board. Default will be 5V) |
GND | GND |
A4 | SDA |
A5 | SCL |
This product is open source! Both, our hardware and software are open source and licensed under the following licenses:
All hardware is released under Creative Commons Share-alike 4.0 International.
You are free to:
Under the following terms:
All software is released under the MIT License(http://opensource.org/licenses/MIT).
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Please check LICENSE.md for detailed license descriptions.