SWC-Advanced-Microscopy SimpleMScanner issues

SWC-Advanced-Microscopy / SimpleMScanner

Simple MATLAB scanning software for demo purposes

GNU Lesser General Public License v3.0

5 stars 2 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

property name incorrect in waveform tester

#49 raacampbell opened 4 years ago
0
How to implement bidirectional scanning?

#48 hwuscut opened 5 years ago
8
The DAQmx polished scanner class could do with some more polishing

#47 raacampbell opened 6 years ago
0
Finish and document polishedScanner

#46 raacampbell closed 7 years ago
1
Test DAQmx scanners on a PCI 6110 or PCI 6115

#45 raacampbell closed 7 years ago
0
The two DAQmx scanners built so far only work at SR=128E3

#44 raacampbell closed 7 years ago
2
Why fillFractionExcess = 2-fillFraction ?

#43 raacampbell closed 7 years ago
2
It's also possible to bind a listener directly to a change in a property

#42 raacampbell opened 7 years ago
0
Write dabs.ni.daqmx versions of at least the more basic scanners

#41 raacampbell closed 7 years ago
0
If setting a GUI value causes an error, the bad value persists

#40 raacampbell opened 8 years ago
0
Some values of imSize fail to produce scan waveforms

#39 raacampbell closed 8 years ago
1
Make the histogram overlay optional

#38 raacampbell opened 8 years ago
0
Color scale with gray/red default

#37 raacampbell closed 8 years ago
1
Teach OO only in 2017?

#36 raacampbell closed 7 years ago
1
Rename the project?

#35 raacampbell opened 8 years ago
0
OO GUI should be able to set all features of the object

#34 raacampbell closed 8 years ago
1
Put graceful property get and set methods into scan object

#33 raacampbell closed 8 years ago
2
Put analog inputs and outputs into different sessions

#32 raacampbell closed 7 years ago
1
Add a preferences system to OO version

#31 raacampbell closed 8 years ago
2
Add shutter line to OO version

#30 raacampbell closed 8 years ago
3
Make it impossible to clf the GUI controls

#29 raacampbell closed 8 years ago
1
Queue size depends on computer speed and isn't obvious how to change

#28 raacampbell closed 8 years ago
1
GUI stalls following return press on bidi rate

#27 raacampbell closed 8 years ago
2
With GUI I sometimes get orphan scan windows that do not close.

#26 raacampbell closed 8 years ago
2
Make the weird sample rate set clearer.

#25 raacampbell closed 8 years ago
1
Can we acquire counter hits at the same time?

#24 raacampbell closed 8 years ago
1
Can we acquire digital inputs at the same time?

#23 raacampbell closed 8 years ago
2
Is it true that oversampling helps?

#22 raacampbell closed 8 years ago
1
Saving does not work with more than one channel

#21 raacampbell closed 8 years ago
1
Looks like AI are pseudodiff by default.

#20 raacampbell closed 8 years ago
1
Aspect ratio changes slightly when bidi box is checked/unchecked in GUI

#19 raacampbell opened 8 years ago
0
test if data have been queued in OO startScan?

#18 raacampbell opened 8 years ago
0
Create skeleton file from _minimal version

#17 raacampbell closed 8 years ago
1
Make sure that all files have very extensive comments

#16 raacampbell closed 8 years ago
2
Destructor in the OO version seems to not be behaving as expected

#15 raacampbell closed 8 years ago
1
Closing the scan figure window should stop the scanners (at least for OO version)

#14 raacampbell closed 8 years ago
1
Consider getting rid of the line that uses the decimate function

#13 raacampbell closed 8 years ago
2
Make an object-oriented GUI version

#12 raacampbell closed 8 years ago
3
There might be dropped frames

#11 raacampbell closed 8 years ago
2
ctrl-c does not quit cleanly

#10 raacampbell closed 8 years ago
2
Increase zoom with fill-fraction

#9 raacampbell opened 8 years ago
0
Scanning sometime stalls (I think if plotting takes too long)

#8 raacampbell closed 8 years ago
2
Calculated frame rate much higher than actual frame rate.

#7 raacampbell closed 8 years ago
2
remove hard-coded ranges from plotImageData

#6 raacampbell closed 8 years ago
1
Find and fix annoying rate warning

#5 raacampbell closed 8 years ago
1
fillFraction needs to change amplitude as well as number of samples

#4 raacampbell closed 8 years ago
2
Add bidirectional scanning to the polished version

#3 raacampbell closed 8 years ago
2
Create step-by-step tutorial files

#2 raacampbell closed 8 years ago
3
Create a "polished" scanner with saving

#1 raacampbell closed 8 years ago
3