:honeybee: HiveMQ Spring Boot Starter

Use an automatically configured mqtt 3 or 5 client in your Spring Boot project.

Getting Started

Gradle Configuration

repositories {
    mavenCentral()
}

dependencies {
    implementation "de.smartsquare:mqtt-starter:0.17.0"
}

Configuration

Application Properties

The main configuration mechanism is via properties. mqtt.host and mqtt.port are required.

# The host to connect to.
mqtt.host=test.mosquitto.org
# The port to connect to.
mqtt.port=1883
# The clientId to use when connecting (random by default).
mqtt.client-id=test
# The session expiry interval in seconds, has to be in [0, 4294967295] (0 by default). Only for mqtt 5.
mqtt.session-expiry=0
# The username to use when connecting.
mqtt.username=admin
# The password to use when connecting.
mqtt.password=test
# If the connection should be encrypted.
mqtt.ssl=false
# If the session should be clean (true by default).
mqtt.clean=false
# The group to use for shared subscriptions.
mqtt.group=group
# The mqtt protocol version to use. 3 and 5 are supported (3 by default).
mqtt.version=3
# Disable or enable the mqtt client. Note that no beans are available to be injected if disabled.
mqtt.enabled=true

Advanced

It is possible to additionally configure the client programmatically by implementing either the Mqtt3ClientConfigurer or Mqtt5ClientConfigurer interface and exposing it as a bean.

@Component
class MqttTimeoutConfigurer : MqttClientConfigurer {

    override fun configure(builder: Mqtt3ClientBuilder) {
        builder.transportConfig().mqttConnectTimeout(10, TimeUnit.SECONDS)
    }
}

Health Indicator

The starter provides a health indicator that checks the connection to the mqtt broker. If the broker is not connected, the health indicator will return DOWN. The health indicator is enabled by default if actuator is on the classpath.
It can be disabled by setting management.health.mqtt.enabled=false.

Usage

Annotation based

The MqttSubscribe annotation is scanned on application start and receives messages on the given topic.
It additionally supports kotlin suspend functions. Those functions are run inside the mqtt client thread pool.

import com.hivemq.client.mqtt.datatypes.MqttQos.AT_LEAST_ONCE
import com.hivemq.client.mqtt.datatypes.MqttTopic
import com.hivemq.client.mqtt.mqtt3.message.publish.Mqtt3Publish
import de.smartsquare.starter.mqtt.MqttSubscribe
import org.springframework.stereotype.Component

@Component
class TestConsumer {

    // Topic and payload
    @MqttSubscribe(topic = "/home/+/temperature", qos = AT_LEAST_ONCE)
    fun subscribe(payload: TemperaturePayload, topic: MqttTopic) {
        println("Temperature is ${payload.value} °C in room ${topic.levels[1]}]")
    }

    class TemperaturePayload(val value: Int)

    // Only topic
    @MqttSubscribe(topic = "/home/+/light/on", qos = AT_LEAST_ONCE)
    fun subscribe(topic: MqttTopic) {
        println("Light turned on in room ${topic.levels[1]}]")
    }

    // Only numeric payload
    @MqttSubscribe(topic = "/home/ping", qos = AT_LEAST_ONCE)
    fun subscribe(ping: Int) {
        println("Ping of iot system is $ping")
    }

    // Raw message
    @MqttSubscribe(topic = "/home/ping", qos = AT_LEAST_ONCE)
    fun subscribe(message: Mqtt3Publish) {
        println("Raw payload: ${message.payloadAsBytes.decodeToString()}")
    }

    // No parameters
    @MqttSubscribe(topic = "/home/ping", qos = AT_LEAST_ONCE)
    fun subscribe() {
        println("Something happened")
    }

    // Suspending function
    @MqttSubscribe(topic = "/home/ping", qos = AT_LEAST_ONCE)
    suspend fun suspending() {
        println("Something happened suspending")
    }
}

Publisher

Messages can be published via the Mqtt3Publisher or Mqtt5Publisher.

import com.hivemq.client.mqtt.datatypes.MqttQos.AT_LEAST_ONCE
import org.springframework.stereotype.Component

@Component
class TestPublisher(private val mqttPublisher: Mqtt3Publisher) {

    fun publish(payload: TemperaturePayload) {
        mqttPublisher.publish("/home/temperature", AT_LEAST_ONCE, payload)
    }

    class TemperaturePayload(val value: Int)
}

Direct usage

Depending on the version, an Mqtt3Client or Mqtt5Client is also exposed and can be used directly.

import com.hivemq.client.mqtt.mqtt3.Mqtt3Client
import com.hivemq.client.mqtt.mqtt3.message.publish.Mqtt3Publish
import org.springframework.stereotype.Service
import java.util.concurrent.CompletableFuture

@Service
class TestService(private val mqttClient: Mqtt3Client) {

    fun publishManually(payload: ByteArray): CompletableFuture<Mqtt3Publish> {
        return mqttClient.toAsync()
            .publish(
                Mqtt3Publish.builder()
                    .topic("test")
                    .payload(payload)
                    .build()
            )
    }
}

GraalVM

This starter supports GraalVM out of the box. There is nothing special to do.

Upgrade Guide

0.15.0 -> 0.16.0

mqtt.host and mqtt.port now must be set explicitly. The default value of localhost:1883 has been removed.
Graceful shutdown is now supported and by default enabled. That has the side effect that messages are delivered on a different thread pool. The application may also take more time to shut down. Graceful shutdown can be turned off with mqtt.shutdown=immediate.

SmartsquareGmbH / mqtt-starter

readme