Simple GigeVision implementation, GVSP, GVCP protocol implemented
var camera = new Camera();
var listOfDevices = await camera.Gvcp.GetAllGigeDevicesInNetworkAsnyc().ConfigureAwait();
var gvcp = new Gvcp();
gvcp.CameraIP = "192.168.10.99";
var reply = await gvcp.ReadRegisterAsync("0x0D04");
To write register you must take the control by Writing 0x02 to CCP register, you can write it manually or use the TakeControl Method from library. If succeeded it will give you control for the time that is set in Heartbeat Register, send True as a parameter to keep the control status alive
var gvcp = new Gvcp
{
CameraIp = "192.168.10.99"
};
if (await gvcp.TakeControl()) //Send True as a parameter to keep alive
{
var reply = await gvcp.WriteRegisterAsync("0x0D04", 1000);
}
else
{
throw new Exception("Camera is already in control");
}
var gvcp = new Gvcp();
gvcp.CameraIP = "192.168.10.99";
var reply = await gvcp.ReadMemoryAsync("0x0D04", 500); //To read 500 bytes from memory address 0x0D04
Above mentioned samples are very basic, and in the Gvcp class there are too many method overloads for each function. Link here: https://github.com/Touseefelahi/GigeVision/blob/master/GigeVision.Core/Services/Gvcp.cs
var camera = new Camera("192.168.10.224");
To Receive the stream raw bytes we need to subscribe to the frame ready event, Make sure to have the same interface as the camera, if you have multiple interfaces you need to define it explicitly when starting the stream
camera.FrameReady += FrameReady;
To start the stream we need to call the method StartStream as:
//For multiple interfaces you can define the Rx IP as: (In this example 192.168.10.221 is the PC IP)
bool isStarted = await camera.StartStreamAsync("192.168.10.221").ConfigureAwait(false);
Once the frame is fully received the FrameReady event will be invoked
private void FrameReady(object sender, byte[] e)
{
// e contains the raw data in bytes
}
var camera = new Camera();
var listOfDevices = await camera.Gvcp.GetAllGigeDevicesInNetworkAsnyc().ConfigureAwait(true);
if (listOfDevices.Count > 0)
{
camera.Gvcp.ForceIPAsync(listOfDevices[0].MacAddress, "192.168.10.243");
}
Simple WPF app example is here https://github.com/Touseefelahi/GigeVision/blob/master/GigeVisionLibrary.Test.Wpf/MainWindow.xaml.cs
There are some issues with the namespaces it is conflicting Services and Models, it will be fixed someday