This repository has been moved into the monorepo
regz is a Zig code generator for microcontrollers. Vendors often publish files that have the details of special function registers, for ARM this is called a "System View Description" (SVD), for AVR the format is called ATDF. This tool outputs a single file for you to start interacting with the hardware:
const regs = @import("nrf52.zig").registers;
pub fn main() void {
regs.P0.PIN_CNF[17].modify(.{
.DIR = 1,
.INPUT = 1,
.PULL = 0,
.DRIVE = 0,
.SENSE = 0,
});
regs.P0.OUT.modify(.{ .PIN17 = 1 });
}
NOTE: just including that file is not enough to run code on a microcontroller, this is a fairly low-level tool and it is intended that the generated code be used with something like microzig.
One can get SVD files from your vendor, or another good place is posborne/cmsis-svd, it's a python based SVD parser and they have a large number of files available.
For ATDF you need to unzip the appropriate atpack from the registry.
regz targets zig master.
git clone --recursive https://github.com/ZigEmbeddedGroup/regz.git
cd regz
zig build
Files provided may be either SVD or ATDF.
Provide path on command line:
regz <path-to-svd> > my-chip.zig
Provide schema via stdin, must specify the schema type:
cat my-file.svd | regz --schema svd > my-chip.zig
It seems that manufacturers are using SVD to represent registers on their RISC-V based products despite it being an ARM standard. At best regz will generate the register definitions without an interrupt table (for now), if you run into problems issues will be warmly welcomed!
TI does have another type of XML-based register schema, it is also unimplemented but planned for support.
The main idea is to target what LLVM can target, however Zig's C backend in underway so it's likely more exotic architectures could be reached in the future. If you know of any others we should look into, please make an issue!