Lite Python based Antminer Monitor !!!
** ATTENTION **
While installing Python be sure to check Add python.exe to Path
in the step Customize Python
If you don't select this option you will probably face some errors while installing the requirementsDownload the latest official release of #AntminerMonitor from https://github.com/anselal/antminer-monitor/releases or the latest unofficial release from https://github.com/anselal/antminer-monitor/archive/master.zip
Unzip the downloaded file in a folder of your preference
Open a windows command prompt or a terminal and navigate to the folder where you unzipped the file using the cd
command
e.g. If you unzipped the file in the folder C:\Users\foo\Downloads\antminer-monitor-master
type the following command and press \<Enter>
cd C:\Users\foo\Downloads\antminer-monitor-master
Your command prompt or terminal should now look like
C:\Users\foo\Downloads\antminer-monitor-master>
This step apply only to Mac users. If you are a Windows or Linux user continue to step 5.
Mac users should run all the commands with sudo eg.
sudo python get_pip.py
Install pip
using one of the following methods:
4.1 Download get-pip.py
from https://bootstrap.pypa.io/get-pip.py and save it inside antminer-monitor-master
. Run the following command to install it:
It will ask for the administrator password. Type it and press \<Enter>. While typing your password you won't see the characters on your screen. This is only for security measures.
sudo python get_pip.py
4.2 Install pip using easy_install
. Again it may ask for the administrator password.
sudo easy_install pip
Install requirements (Mac users don't forget sudo
)
python -m pip install -r requirements.txt
python manage.py create-db
python manage.py create-admin
Default creadentials are username: admin
- password: antminermonitor
. You can change the password from the settings menu.
(Mac users don't forget sudo
)
python manage.py run -h 0.0.0.0 -p 5000
Fire up a browser and point it to http://localhost:5000
if you are running the app on the same machine OR http://<ip>:5000
if you are accesing the app from another machine on the same network, by replacing <ip>
with the machine's ip running AntminerMonitor.
Feel free to change the host (-h) and port (-p) parameters as needed by your setup.
You can set the host (-h)
and port (-p)
parameters in your .flaskenv file to avoid typing them when starting the app.
AntminerMonitor runs by default in development mode, using Flask's development server. In development mode, this server provides an interactive debugger and will reload when code is changed.
To switch to production mode, edit .flaskenv
and set FLASK_ENV="production"
Edit antminermonitor.service
and adjust it properly to your environment
As root, run the following:
# Copy file service file to systemd's system folder
cp antminermonitor.service /etc/systemd/system/
# reload the daemon to apply changes
systemctl daemon-reload
# That’s it. We can now start the service:
systemctl start antminermonitor
# And automatically get it to start on boot
systemctl enable antminermonitor
1HYCBovF6mqqKMyG4m2DQxXpdKmogK4Wuw
LLrjq6nRokS74yPMspitHkXv4nLtEyebNW
XuEnZtsCmWcDwKVe82wQddsfwUifXyeRoQ
0x5bD8813Da5148fbc841bB18b9411fF72EdC8e10a