-
A few users have reported wildly fluctuating ASIC die temperature readings, sometimes 20ºC or more between individual temperature readings.
-
I don't know much about this, but it would be good to add such a format for validation, as it is actively promoted by DIIA
-
On some BM1370 units the die temperature readings collected by the EMC2101 are incorrect. We've seen readings both too high and too low. Both at idle and while mining.
Initially it appears some uni…
-
First thing @Georges760 **amazing crate!!!**
I started play with it recently, now I am on the step of sending the work to the ASICs. Does your crate already support it and I am blind and do not se…
-
@luke-jr
Dear friends ,
Somehow we have been able to launch and run the Bfgminer 5.5.0-34....but we have some small issues and need your accurate and good timing help.
Issue https://github.com/l…
-
- gNMI uses Dbus `ApplyPatchDb` API. Currently it doesn't use namespace & it has to be updated.
- `mixed_db_client.go` calls `ApplyPatchDb` [here](https://wwwin-github.cisco.com/whitebox/sonic-gnmi…
-
**Goals**:
Required debugging:
- Debug test stand and understand Thursday's results
- [x] Understand where the 600pF on dnn_out come from (measure with ASIC board alone then with ASIC board and c…
-
There is a bug in the temperature graph. See the attached picture where the graph is stuck at ~69 deg, but the actual ASIC is at 63.5 deg.
I noticed because my BitAxe is on my garage workbench and…
-
This came up in chat. On the colo rack, @augustuswm saw some failures to completely sync the NAT tables for VMs from Nexus to Dendrite. The ultimate cause of that appears to be that we're hitting the …
-
We have the special screen for connecting to the WiFi at boot, it would be nice to have a special screen for the ASIC init sequence since it takes a little while.
It could look like:
```
1x BM1…