issues
search
asfarley
/
ThrottleController
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
My angle magnets are too powerful! You cannot handle them!
#11
asfarley
opened
9 months ago
1
Throttle PCB connector should be horizontal, not right-angle
#10
asfarley
closed
9 months ago
1
PCB corner is too close to nut holding torque-plate
#9
asfarley
closed
9 months ago
1
Thread on torque-plate damaged while press-fitting angle sense magnet
#8
asfarley
closed
9 months ago
1
Bearing holes are too loose, or too tight
#7
asfarley
closed
9 months ago
1
D holes on base-plate aren't threaded
#6
asfarley
closed
9 months ago
1
Throttle-arm contacts casing on upper end
#5
asfarley
closed
9 months ago
1
Knob handles rattle
#4
asfarley
closed
9 months ago
1
Thread on throttle-arm torque plate causes binding with nut
#3
asfarley
closed
9 months ago
2
Angle magnet holes are too tight
#2
asfarley
closed
9 months ago
1
Detent magnet holes are too loose
#1
asfarley
closed
9 months ago
1