bionicbone 433mhz_Rolling_Code issues

bionicbone / 433mhz_Rolling_Code

quichip Add Rolling Code Protection

GNU General Public License v3.0

12 stars 3 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Can we use different timings on the "button press" signals to create more "Qiachip Hold Pulses"?

#35 bionicbone opened 6 months ago
0
Fixes #31 - Tx0 will not work

#34 bionicbone closed 7 months ago
0
Fixes issue 32 - the Large Rolling Code arrays do not work

#33 bionicbone closed 7 months ago
0
Large Rolling Code arrays do not work

#32 bionicbone closed 7 months ago
0
Tx0 will not work

#31 bionicbone closed 7 months ago
0
Major Update - Multiple Tx

#30 bionicbone closed 7 months ago
0
After Rx is totally out of sync (>10 from Tx) code processes Button number as Received Data again

#29 bionicbone closed 7 months ago
1
Add to Docs

#28 bionicbone closed 7 months ago
0
Forced Reset also applies initValue to rollingCode[]

#27 bionicbone closed 7 months ago
0
Redo RANDOM_NUMBERS compile error

#26 bionicbone closed 7 months ago
0
Add ability to Force Reset, Button 1 > 5 seconds

#25 bionicbone closed 7 months ago
0
Fix Random Number Compile Issue

#24 bionicbone closed 7 months ago
0
Add Second Tx fob

#23 bionicbone closed 7 months ago
1
Potential Nano Random Number Hack (untested)

#22 bionicbone opened 7 months ago
0
Update Tx Rx Connections Documentation

#21 bionicbone closed 7 months ago
0
Add Tx Rx Connection for Documentation

#20 bionicbone closed 7 months ago
0
Simplify Debug Messages

#19 bionicbone closed 7 months ago
0
Add Brute Force detection and Rx delay

#18 bionicbone closed 7 months ago
0
Increase Tx timing from 285 to 300 due to errors when background interference is increased

#17 bionicbone closed 7 months ago
0
Known Bug: (rare) LockDown could overrun millis() reset

#16 bionicbone opened 7 months ago
0
RollJam Threat

#15 bionicbone opened 7 months ago
1
Add an init-value to the list of rolling codes once all have been consumed

#14 bionicbone closed 7 months ago
0
New Method: Accept all Data then Validate

#13 bionicbone closed 7 months ago
1
Alter rollingCode[] to 994, reduce memory while adding new features

#12 bionicbone closed 7 months ago
0
Rx Nano 4 button output should only go high for 210ms

#11 bionicbone closed 7 months ago
0
YouTube ideas for Imporvement are Great !!!

#10 bionicbone closed 7 months ago
2
Preamble is not required, and adds no purpose.

#9 bionicbone closed 7 months ago
1
uint8_t ReadDataPins() should control all timing.

#8 bionicbone closed 7 months ago
1
Add all for Tx Buttons and Matching Rx Outputs

#7 bionicbone closed 7 months ago
0
Add Pin Transmit & Receive value so user can use all 4 buttons

#6 bionicbone closed 7 months ago
0
Alter #defined on MODE and RANDOM_NUMBERS, RANDOM_NUMBERS has priority when selected

#5 bionicbone closed 8 months ago
0
Change Serial.print lines for debuging

#4 bionicbone closed 8 months ago
0
Upload a Release version

#3 bionicbone closed 8 months ago
0
Allow rollingCode[] to be a length that cause multiple runs with different combinations

#2 bionicbone closed 7 months ago
1
Repeated Code Check

#1 bionicbone closed 8 months ago
1