EVSE

Introduction

This collection of library shall enable the development of an EVSE based on an STM32F0 microcontroller. It is the software for the CircuitMaker project linked above.

controlpilot_stm32

This library configures and enables the interface main interface for handling the EVSE logic with the vehicle.

encoder_stm32

This library configures and enables the interface for a possible rotary encoder to be used as the user interface.

flash_stm32

This library configures and enables the interface for storing data between reboot.

font8x8_basic

This library represents a selection of font glyphs that are used with the OLED display.

helper_stm32

This library provides a selection of functions that configure the STM32F0 and bridge multiple libaries.

oled_stm32_ssd1306

This library configures and enables the interface for SPI to an SSD1306-based OLED display.

usart_stm32_console

This library configures and enables the interface for USART to an FTDI chip for debug information.

userbutton_stm32

This library configures and enables the interface for a selection of buttons to be used as the user interface.

ws2812_led

This library configures and enables the interface for a 1-wire signal to control a WS2812B-based LED array.