francotiveron Choreo issues

francotiveron / Choreo

Choreo User Interface

0 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Ai project update

#95 francotiveron closed 1 year ago
0
Releast 1.6.5

#94 francotiveron closed 1 year ago
0
Rotational

#93 francotiveron closed 1 year ago
0
Introduce option for rotational axis

#92 francotiveron closed 1 year ago
3
--

#91 francotiveron closed 1 year ago
0
Change Library for Flush Registry

#90 francotiveron closed 1 year ago
0
Introduce Storage Registry Flush

#89 francotiveron closed 1 year ago
0
Develop

#88 francotiveron closed 1 year ago
0
Axis User_Reset Flag is not reset in TwinCAT

#87 francotiveron opened 2 years ago
1
Auto Logout

#86 francotiveron opened 2 years ago
1
cues values beyond the max accel, vel or decel

#85 francotiveron closed 2 years ago
3
following error enable check box and value

#84 francotiveron opened 2 years ago
5
Develop

#83 francotiveron closed 2 years ago
0
It would be great if we can specify the color the axis changes based on the fault code. I am currently using your fault code function to show faults for all the limits, loadcells, position error, etc. if possible I would like to be able to specify different colors for different faults. Maybe the array can have 2 columns instead of 1 with the second column being a number to indicate red, yellow, orange, etc.

#82 francotiveron opened 2 years ago
0
Currently when we have a group tolerance fault, there is no way to clear it and realign the group except for clearing the group or manually jogging from the axis’ physical jog buttons. We would like a software option to realign a group. Currently if an axis goes over or under tolerance there is a unique fault for each. If the UI sees this fault we are thinking a button on the axis pops up that says realign. Upon pressing the button it would do a few things such has clear the axis’ group assignment, create a move absolute to a value I can create in twincat and display a popup window that says something like “press run to realign axis”. Once the axis is moved and the user presses the ok on the pop up it will reassign the axis to the group but not save any of the other group values that normally happen when assigning to a group

#81 francotiveron opened 2 years ago
0
It would be great to have a way to tune an axis from inside the UI. This could be button from inside the axis setup page that opens another page with the ability to create moves, set PID variables and watch a motion graph. I can provide a few variables for the graph but most important would be command velocity and actual velocity.

#80 francotiveron opened 2 years ago
0
We would also like the ability to be able to save/load a show/configuration file to USB or the harddrive. Not exactly sure how this would work since we do a lot of saving and variable writing in twincat as we use the UI, but it would be something useful to have.

#79 francotiveron opened 2 years ago
0
We have been asked for user specific axes. For example, user1 might be able to move axis 1-4 and user2 might only have access to axes 5-8. Not sure the best way to implement this so we would look for your suggestions

#78 francotiveron opened 2 years ago
0
Currently all presets run at the default axis speed which doesn’t seem to be enough capability. One thought is to have a preset call a cue which would allow for variable speed moves. This would mean changing the way a preset is written to creating a cue first then assigning the cue to a preset.

#77 francotiveron opened 2 years ago
0
Group realignment routine

#76 francotiveron opened 2 years ago
0
File saving

#75 francotiveron opened 2 years ago
0
Load based target

#74 francotiveron opened 2 years ago
0
Load cell filter

#73 francotiveron opened 2 years ago
0
Color change for fault severity

#72 francotiveron opened 2 years ago
3
Alternate units

#71 francotiveron opened 2 years ago
0
Larger cues for touch

#70 francotiveron opened 2 years ago
0
Cue following parameters (wait for time/target/complete etc.)

#69 francotiveron opened 2 years ago
0
Alter language for autofollow

#68 francotiveron opened 2 years ago
0
Ability to apply setup values to multiple axes

#67 francotiveron opened 2 years ago
3
Change axis selection check boxes in moves and cues to larger selection buttons

#66 francotiveron closed 1 year ago
3
If group is cleared, don’t enter group setup screen and software disable it

#65 francotiveron opened 2 years ago
0
Axis tuning variables (p-gain, Jerk, Vel feed forward)

#64 francotiveron closed 1 year ago
3
Soft limit enable/disable

#63 francotiveron closed 1 year ago
3
Black out disabled loadcell

#62 francotiveron closed 1 year ago
1
Programable Jog Accel/Decel

#61 francotiveron closed 1 year ago
3
Blank cue should start with first row

#60 francotiveron opened 2 years ago
0
Cue time always reads zero

#59 francotiveron opened 2 years ago
0
Ability to change cue number

#58 francotiveron opened 2 years ago
0
Hold open brakes until cue completes

#57 francotiveron opened 2 years ago
0
Time based cues

#56 francotiveron opened 2 years ago
0
If Group/preset is cleared, default its name

#55 francotiveron opened 2 years ago
0
Larger distinction between sliding up/down left/right

#54 francotiveron opened 2 years ago
1
½ press and hold time to enter setup

#53 francotiveron closed 1 year ago
1
Alter jog scale for clarity (currently looks like screen scroll)

#52 francotiveron opened 2 years ago
3
Relative moves don’t show negative values

#51 francotiveron opened 2 years ago
0
Screen change should clear moves/cues

#50 francotiveron closed 1 year ago
1
Develop

#49 francotiveron closed 2 years ago
0
add an analog jog stick

#48 francotiveron closed 2 years ago
6
disable loadcells

#47 francotiveron closed 2 years ago
1
The clear button is a little small

#46 francotiveron closed 2 years ago
2