issues
search
fvaldesc
/
ardupirates
Automatically exported from code.google.com/p/ardupirates
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Compile error
#44
GoogleCodeExporter
opened
9 years ago
0
I need to understand code!!!!!!!
#43
GoogleCodeExporter
opened
9 years ago
0
Y6 code
#42
GoogleCodeExporter
opened
9 years ago
0
Can't update stable mode pid.
#41
GoogleCodeExporter
opened
9 years ago
0
magnetometer problem
#40
GoogleCodeExporter
opened
9 years ago
0
Gyro and Acc values swapped
#39
GoogleCodeExporter
opened
9 years ago
0
GPS Hold: Integrator limiter evaluation
#38
GoogleCodeExporter
opened
9 years ago
0
GPS Hold: gps_err_lon and gps_err_lat may cause a large tilt at second activiation.
#37
GoogleCodeExporter
opened
9 years ago
0
ardupirates compatible ardumega2560 error
#36
GoogleCodeExporter
opened
9 years ago
3
arducopter pid for 2830-13 850KV
#35
GoogleCodeExporter
opened
9 years ago
2
nothing works when I pull the USB cable... - HELP!@#!@#
#34
GoogleCodeExporter
opened
9 years ago
0
LP3 camera trigger
#33
GoogleCodeExporter
opened
9 years ago
0
GPS hold doesn't work good
#32
GoogleCodeExporter
opened
9 years ago
4
Y6 Support
#31
GoogleCodeExporter
opened
9 years ago
3
CLI menu does not show up
#30
GoogleCodeExporter
closed
9 years ago
1
throttle doesnt work
#29
GoogleCodeExporter
closed
9 years ago
1
Bug in Radio.pde by use of #ifdefs and #ifndefs
#28
GoogleCodeExporter
closed
9 years ago
1
Compass activated & CLI compass offset initialize
#27
GoogleCodeExporter
opened
9 years ago
1
Restart gyro calibration during startup while gyros and accels not stable
#26
GoogleCodeExporter
opened
9 years ago
1
Revision 569 Problem
#25
GoogleCodeExporter
opened
9 years ago
0
BATTERY_EVENT 1 not working
#24
GoogleCodeExporter
opened
9 years ago
0
#define IsAM disable the camera stabilisation
#23
GoogleCodeExporter
opened
9 years ago
0
Transmitter roll/pitch/yaw mid
#22
GoogleCodeExporter
opened
9 years ago
0
Radio.pde code error
#21
GoogleCodeExporter
opened
9 years ago
1
Suggest consolidating CLI and GCS
#20
GoogleCodeExporter
opened
9 years ago
11
GPSERR
#19
GoogleCodeExporter
closed
9 years ago
2
APM_RC_Class::Init sets timer to 1.5ms, should be 1ms
#18
GoogleCodeExporter
opened
9 years ago
6
Suggest: automated MAGCALIBRATION
#17
GoogleCodeExporter
closed
9 years ago
4
GPS Hold does not seem to work
#16
GoogleCodeExporter
closed
9 years ago
1
Sonar not work together with BMP
#15
GoogleCodeExporter
opened
9 years ago
12
Coding conventions
#14
GoogleCodeExporter
closed
9 years ago
2
Serial monitor help functionality
#13
GoogleCodeExporter
closed
9 years ago
4
rev254 motors.pde xmode
#12
GoogleCodeExporter
closed
9 years ago
4
Suggest single point for user-configurable variables
#11
GoogleCodeExporter
closed
9 years ago
12
New DIY Drones Mediatek firmware 1.6 support.
#10
GoogleCodeExporter
closed
9 years ago
1
FLIGHT_MODE_X control range
#9
GoogleCodeExporter
opened
9 years ago
9
Caution! Motors might stop in mid-flight!
#8
GoogleCodeExporter
closed
9 years ago
4
Testflights done R212 HExacopter
#7
GoogleCodeExporter
opened
9 years ago
11
change of AUX switches in code R212
#6
GoogleCodeExporter
closed
9 years ago
1
change of AUX switches in code R212
#5
GoogleCodeExporter
closed
9 years ago
1
Testflights done R202
#4
GoogleCodeExporter
closed
9 years ago
3
Things that should be changed in the next update
#3
GoogleCodeExporter
closed
9 years ago
5
Stop YAW movement if stick is released
#2
GoogleCodeExporter
closed
9 years ago
5
Integrate Heading Hold Slope Filter into code
#1
GoogleCodeExporter
closed
9 years ago
3