issues
search
grblHAL
/
core
grblHAL core code and master Wiki
Other
305
stars
74
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Just a question: I don't quite understand why Terje Io doesn't implement automatic tool changing based on upper computer processing?
#343
hanke-cnc
closed
11 months ago
2
Polar kinematic from Esp32_GRBL
#341
Melkiyby
closed
3 months ago
3
A axis is not working on CoreXY mode on BTT-SKR 2.0
#340
Avara7
closed
10 months ago
3
MPG on Secondary UART
#339
dogmaphobic
opened
11 months ago
19
Incorrect HALT trigger behavoiur
#337
0lympu5
closed
10 months ago
12
Strange bug, sending system parameter commands in a short period of time will result in an error.
#336
hanke-cnc
closed
11 months ago
4
Axes moves together
#335
userfuckingname666
closed
11 months ago
11
is there anyway to reset settings to default? clear EEPROM, Factory reset, ETC?
#334
crackinx
opened
11 months ago
14
Rotational Axis A,B or C
#333
FAB619
closed
2 months ago
1
How to register and retrieve tool height data in tool table for the machine with ATC (using macro) and touch off probe at fixed location?
#332
karoria
closed
6 months ago
41
Add definition for STM32H723xx series processors
#331
dresco
closed
11 months ago
0
Homing only moves one motor of ganged axis
#329
hersi97
closed
11 months ago
9
Hi, terjeio, can I have the line of code for making grbl return an error code?
#328
hanke-cnc
closed
1 year ago
1
MPG & DRO: two independent data streams?
#327
nickshl
closed
6 months ago
28
STMH723FZT6
#326
MrKapim
opened
1 year ago
30
Enable spindle synchronized compilation, and the firmware will crash after sending "?" about 600-1000 times.
#320
hanke-cnc
closed
1 year ago
7
Not entering the reset and sending the welcome message while in an emergency stop state can cause Candle to fail. I would like to discuss some solutions with you.
#319
hanke-cnc
closed
1 year ago
5
Porting to XMC MCU
#318
sai-ydev
opened
1 year ago
2
Rotary Axis configuration
#316
karoria
closed
10 months ago
2
Laser power allways near 100%
#314
throbulator01
closed
1 year ago
3
Add support for control panel NVS settings
#313
dresco
closed
1 year ago
0
How to define the analog output of M68 for F4?
#311
hanke-cnc
closed
1 year ago
4
Question about the maximum value of the X-axis data
#302
CHTUZKI
closed
1 year ago
4
Reported positions are incorrect after adding custom SCARA kinematics
#300
JelmerV
closed
1 year ago
4
Strange vibration
#294
Demitrius
opened
1 year ago
5
Homing by Z-pulse of servo
#290
karoria
closed
2 months ago
3
Negative position after homing
#289
Demitrius
closed
1 year ago
2
Close Loop GRBL or Stepper Drive Alarm support
#287
MuhammadQaisarAli
opened
1 year ago
6
Constant rotation of an axis by just providing RPM.
#286
MuhammadQaisarAli
closed
1 year ago
7
Minimum, Maximum Limit Switch and Home Origin Swatch support for each axis
#285
MuhammadQaisarAli
closed
2 months ago
1
Hi, I see that there is an automatic real-time report mode, where is it enabled? I did not find it in config.h
#281
hanke-cnc
closed
1 year ago
4
Feature request: BLTouch/Servo probe support
#280
wakass
opened
1 year ago
11
typo in motor_pins.h for 5AXIS : B_LIMIT_BITT
#279
multigcs
closed
1 year ago
1
Automatic Tool Change
#278
karoria
closed
6 months ago
8
Ethernet connection issue
#277
AronAtGit
closed
11 months ago
23
Wiring limits and setup settings.
#274
Demitrius
closed
1 year ago
7
Hi, once an error occurs in the G code, it will return an error and the next one will not return an error. I want to add a system setting for the user to choose by themselves. Is it possible?
#272
hanke-cnc
closed
1 year ago
1
Motion after HALT issued in paused canned cycle
#271
Amarpal89
closed
1 year ago
7
HELP, Flashtool 3.4.2 not found at expressif site any more
#267
Ams-Laser
closed
1 year ago
2
Add init for 3rd party control panel plugin
#266
dresco
closed
11 months ago
7
Ganged axis does not work if defined in my_machine.h
#265
muhammadelmogy
closed
1 year ago
9
Motor enable and Disable pin does not change state
#264
muhammadelmogy
closed
1 year ago
14
Can't compile 6-axis for Neculeo-64 STM32F4RE Board
#263
MuhammadQaisarAli
closed
10 months ago
13
SKR 3 - Z homing and limits
#262
Demitrius
closed
1 year ago
2
I downloaded my_plugin.c, and added my_plugin_init() to board_init in st_morpho.c, grblhal seems to be dead, there will be no response
#260
hanke-cnc
closed
1 year ago
3
A strange demand from a user? He needs to save the mechanical coordinates after power off?
#259
hanke-cnc
closed
1 year ago
4
I don't understand, if I don't use the USB virtual serial port and enable the KeyPad plug -in, which serial port will the keypad plug -in?
#258
hanke-cnc
closed
1 year ago
4
Compile instructionsat https://github.com/grblHAL/core/wiki/Compiling-grblHAL do not match reality
#256
imechura
opened
1 year ago
1
Error while compiling
#255
zab-ig
closed
1 year ago
3
I want to add a custom system setting, such as $777, how should I do it?
#251
hanke-cnc
closed
1 year ago
2
Previous
Next