linux4sam at91bootstrap issues

linux4sam / at91bootstrap

Second level bootloader for Microchip SoC (aka AT91)

https://www.linux4sam.org/linux4sam/bin/view/Linux4SAM/AT91Bootstrap4

112 stars 232 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

driver: at91_mci: add support for MCI SD card slot selection

#131 liviorecchia closed 3 years ago
3
contrib: board: added AcmeSystems srl Fox Board G20

#130 liviorecchia closed 3 years ago
3
Makefile: Remove -nostartfiles from LDFLAGS

#129 celledge closed 3 years ago
1
Add OP-TEE loading support to at91bootstrap v4.x

#128 clementleger closed 2 years ago
18
-nostartfiles is not an LDFLAG

#127 celledge closed 3 years ago
14
v4 fails to load Linux kernel

#126 edgar-bonet closed 3 years ago
26
Added AcmeSystems srl Fox Board G20. Now finally boots.

#125 liviorecchia closed 3 years ago
16
v4 build error: undefined reference to `get_cm_sn'

#124 edgar-bonet closed 3 years ago
3
emmc boot issue

#123 hoseck closed 3 years ago
1
Suspicious (?) RAM performance on SAMA5D2

#122 zougloub closed 2 years ago
12
Timeouts on custom SAMA5D27 board

#121 fabioestevam closed 3 years ago
15
Winbond SPI Flash support

#120 inindev closed 3 years ago
0
New board configuration AT91SAM9260-glasnost

#119 vd-rd closed 3 years ago
3
SAM9X60 DDR2 SIP Boot Issue

#118 mikucukyilmaz closed 3 years ago
9
sam9x60ek.h: ECC lookup table offsets corrected.

#117 ksdd closed 3 years ago
3
Compile error (clk-common.c:265:10: error: ‘AT91C_ID_SMD’ undeclared)

#116 ruslan-gennadievich closed 3 years ago
5
Support Off-Chip Memory Scrambling (OSMC) via config

#115 lnksz closed 3 years ago
18
Configuration of OSMC RAM Scrambling

#114 lnksz closed 3 years ago
5
driver/load_kernel: Update dbg_* messages

#113 lnksz closed 3 years ago
5
lib/fdt: Constify input char* args

#112 lnksz closed 4 years ago
1
lib/fdt: Constify input-only char* arguments

#111 lnksz closed 4 years ago
2
we are using ATSAMA5D27-D1G-CU in our prject. we used eMMC as a boot media. SDMMC0_VDDSEL is this mandatory to use? can we use VDDSDHC for 3.3V alone for booting and other read and write operation?

#110 shiva-kumar35 closed 4 years ago
2
Adding initial support for amplifierNode.

#109 vthakur7f closed 4 years ago
2
Fixes RTC precision loss in ACMESYSTEMS boards

#108 mrjimenez closed 4 years ago
1
eMMC init issue

#107 arahowerya closed 4 years ago
23
How feasible is adding an u-boot like environment to at91bootstrap

#106 fberndl closed 4 years ago
8
problem loading uboot from emmc

#105 IvanZholubak7 closed 4 years ago
28
Fixed boot blocking if hardware information buffer size is incorrect

#104 FabienLehoussel closed 4 years ago
3
sam9x60 : qspi boot error

#103 FabienLehoussel closed 4 years ago
12
Update SAMA5D4 Xplained MCI definition

#102 vpetrigo closed 4 years ago
2
sam9x60_early branch report undefined reference to `get_cm_rev'

#101 zizimumu closed 4 years ago
4
sama5d27_som1_ek: fix over-consumption erratum check

#100 florolf closed 4 years ago
2
Fix memcpy and memset to standard return pointers

#99 HDC67 closed 5 years ago
8
problem loading uboot from emmc

#98 n3b0j5a closed 5 years ago
20
Makefile: restore target name when CONFIG_FATFS is not set

#97 jrbyrne closed 5 years ago
2
board: sama5d27_som1_ek: Fix LED switch on

#96 LeSpocky closed 5 years ago
2
build: Consider SOURCE_DATE_EPOCH

#95 LeSpocky closed 5 years ago
0
driver: sdhc: Fix typo

#94 Oleh-Kravchenko closed 5 years ago
0
ddram: add missing volatile keywords

#93 pbugalski closed 5 years ago
4
Fix recursive make call consistency in config-clean.

#92 gpcz closed 5 years ago
1
Makefile: fix usage of "make" command to be generic

#91 gpcz closed 5 years ago
0
Are configurations with "mem=" in kernel command line known to work with recent kernels (>=4.9)?

#90 antonsviridenko closed 5 years ago
3
Add -fno-pie to CPPFLAGS

#89 nikomauno closed 5 years ago
6
Fix/sdhc pio

#88 weo closed 5 years ago
0
Enable DDR only, if it supported by card and host

#87 Oleh-Kravchenko closed 5 years ago
4
Why the pin NANDRDY is not initialized in nandflash_hw_init()?

#86 antonsviridenko closed 5 years ago
4
Add support for Macronix QSPI NOR flash.

#85 mattwood2000 closed 6 years ago
0
blinking led program is not working with Bootstrap code.

#84 tejasbhumkar closed 6 years ago
16
Allow users to override the devicetree blob filename as a menuconfig …

#83 mattwood2000 closed 6 years ago
1
Allow users to override the devicetree blob filename as a menuconfig …

#82 mattwood2000 closed 6 years ago
2

Previous Next