pazi88 STM32_CAN issues

pazi88 / STM32_CAN

CAN bus Library for Arduino STM32

GNU General Public License v3.0

62 stars 24 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Baudrate is calculated with SJW in the mix

#40 attie-argentum opened 1 day ago
0
The example does not compile on nucleo_f429zi

#39 chriskinal opened 2 days ago
0
Not Stable when using FreeRTOS

#38 wltue opened 3 weeks ago
2
Using CAN1 and CAN2 simultaneously only works by modifying the initializeFilters() function.

#37 tscheskn opened 1 month ago
1
Support for PB8/PA12 CAN pin mapping on STM32F042

#36 sshsphere opened 2 months ago
1
Support for pin mapping on STM32F042

#35 TT-ZX opened 3 months ago
0
Hangs on STM32F042

#34 TT-ZX opened 3 months ago
2
Nucleo-G0B1RE Compiling Error

#33 Aurentiaco35 closed 3 months ago
1
Nucleo-64 F072RB compiling error: 'GPIO_AF9_CAN1' was not declared in this scope; did you mean 'GPIO_AF4_CAN'?

#32 DadoKomar closed 3 months ago
3
Using enableSilentLoopBack() crashes F303

#31 dxx-223 closed 4 months ago
1
Filter logic is wrong

#30 ppcd9220 closed 4 months ago
5
Doesn't work on nucleo-l433-rc-p

#29 Cocojajaj opened 4 months ago
0
Not compiling using H753ZI

#28 Hitomamacs opened 4 months ago
1
Change the can ports to be defined at compile time rather than runtime

#27 abinash18 closed 4 months ago
4
error compiling

#26 stproj18 closed 4 months ago
2
Problem with multiple CAN lines

#25 siksndavis closed 4 months ago
2
STM32F405 is compiling but not Working

#24 ToRoCu closed 3 months ago
8
Is there possibility to switch between CAN ALT and DEF during runtime?

#23 johnnykow1234 opened 7 months ago
1
Support for STM32G0B1 with different CAN pin numbers, CAN2 on PB0/PB1

#22 rondlh closed 3 months ago
2
maple_mini_origin compiles, maple_mini_b20 doesn't

#21 HoeckDK closed 3 months ago
1
Compiling Error with STM32 L476RG

#20 Joao4200 closed 3 months ago
1
Stm32f1 is leaving sending the message

#19 isarwar93 opened 9 months ago
2
extending .write() for sending CAN remote frames

#18 karl-dietmann closed 9 months ago
1
quick fix README

#17 sdikiy closed 10 months ago
0
fix warning: unused parameter

#16 sdikiy closed 10 months ago
0
Error compiling on F303

#15 futuranet closed 4 months ago
3
Error compiling - STM32F042F6P6TR

#14 pippopippo69 closed 3 months ago
9
PlatformIO Linker error when USBCON/CDC Enabled

#13 gateseee closed 1 year ago
5
Error compiling code

#12 sam-tj closed 3 months ago
10
Update actions for multiple targets

#11 designer2k2 closed 1 year ago
1
Create a release (1.1.0)

#10 designer2k2 closed 1 year ago
1
Add sniffer example for logging CAN-bus messages

#9 Juseus closed 1 year ago
0
Change back to CAN specific interrupt disables.

#8 pazi88 closed 1 year ago
0
CAN fixes tested on STM32F412RET6

#7 jmailloux closed 1 year ago
0
Bugfix for example folder and CI by compiling examples, spell and lint check.

#6 designer2k2 closed 1 year ago
1
Not able to used the library

#5 Pranav0727 closed 1 year ago
3
Incoming messages randomly repeating, getting stuck in buffer?

#4 ironhal0 closed 1 year ago
7
Extended identifier

#3 ru3dnw closed 1 year ago
6
After first call of Can1.write(CAN_TX_msg); my stm32 sends the same CAN_TX_msg forever.

#2 BotSpace opened 1 year ago
1
Specify can individual can pins from program

#1 phoenixs3 opened 2 years ago
1