probatio probatio-3dprinting issues

probatio / probatio-3dprinting

Probatio's models for 3D printing

Other

2 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Work in progress: FLOSS-based version without base structures

#18 DocSunset opened 3 years ago
2
How to refer the authorship of a 3d Model I copied from someone else?

#17 jtragtenberg opened 3 years ago
0
Design a version of probatio_block_top_dual_pistons_cap.stl with easy adaptation to other magnet sizes

#16 jtragtenberg opened 3 years ago
1
Devise a means for strongly affixing blocks

#15 DocSunset opened 3 years ago
0
Improve robustness of mechanical connection between main parts (blocks, bases, etc)

#14 DocSunset opened 3 years ago
0
Organize Fusion 360 files

#13 jtragtenberg opened 3 years ago
0
Define a 3D printer calibration protocol to improve the Block snap-fittings

#12 jtragtenberg opened 3 years ago
3
Improve Blocks 3D models for better adhesion

#11 jtragtenberg opened 3 years ago
5
Parametrize 3D model to adapt to differently calibrated 3D printers

#10 jtragtenberg opened 3 years ago
5
2x2 block parametric design flaw (Fusion 360)

#9 edumeneses opened 3 years ago
0
Improve Bases printability/makeability

#8 jtragtenberg opened 3 years ago
1
Define where to put the base's microcontroller

#7 jtragtenberg opened 3 years ago
1
Should there be a snap-fit between the pistons cap and cup?

#6 jtragtenberg closed 3 years ago
1
How well should I expect the snap-fit between the block bottom and block top?

#5 jtragtenberg closed 3 years ago
1
form of the hole in the "probatio_base_1x3_bottom_3mm_v9" file could be the same as a connector to a hub

#4 jtragtenberg opened 4 years ago
0
STL base_1x3 file naming

#3 jtragtenberg opened 4 years ago
2
Merge internal margin with base-bottom: make a unique body

#2 filipecalegario opened 4 years ago
0
improvements in probatio_base_1x3_top_3mm_v7

#1 jtragtenberg closed 4 years ago
2