robomechs 6-AXIS-USBCNC-GRBL issues

robomechs / 6-AXIS-USBCNC-GRBL

This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl

195 stars 94 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

No #undef USEUSB in grbl.h

#48 itsme65757 opened 1 year ago
0
What is the problem that the serial port cannot communicate?

#47 hdltzd opened 2 years ago
0
UART TX overlapping

#46 daniJVV opened 2 years ago
0
Uart1 cant connect hc05 bluetooth

#45 om89 closed 2 years ago
1
Probing Issue

#44 pagabee opened 2 years ago
0
Set machine positions for homed limit switches

#43 NgocLe97 opened 3 years ago
1
Using UART3 same times with UART1 please

#42 byronin closed 3 years ago
1
Installation on arduino uno or nano.

#41 Doomslayer12 opened 3 years ago
1
Planner buffer question

#40 e-zeki opened 3 years ago
0
pcb for this project (inside)

#39 whoim2 opened 3 years ago
0
about coolant!

#38 byronin opened 3 years ago
2
configure grbl with "$x=val" commands (optional)

#37 Mickle1977 opened 3 years ago
0
$h then system happens to restart

#36 bd7jat opened 4 years ago
0
! news. Project is no longer supported.

#35 robomechs opened 4 years ago
3
Makefile?

#34 m0n5t3r opened 4 years ago
3
CNCjs Issue due to bug in mode state reporting

#33 Duffmann closed 4 years ago
5
only x axis can reach 230khz, y and z axis have problem

#32 mwshakoor154 closed 4 years ago
1
OT Question: How to create the pinout diagram like this?

#31 hdo closed 4 years ago
2
backlash compensation

#30 mwshakoor154 closed 4 years ago
1
Dual Y axis

#29 HVisMyLife closed 4 years ago
1
Support for the Black Pill STM32F411CEU6

#28 creisey opened 4 years ago
0
Reset not working on Blue Pill and Black Pill with limit alarm is set

#27 troth530 closed 4 years ago
2
Bug with PWM when frequency is reduced

#26 mstrens closed 4 years ago
1
invert feed-hold

#25 creisey closed 4 years ago
2
It should be useful allowing to invert PWM signal

#24 mstrens opened 5 years ago
0
support for tmc2130

#23 frankdunn opened 5 years ago
1
Can I use CNCjs?

#22 viewsat opened 5 years ago
0
Feed Overrides doesn't work properly

#21 S2000Stefan opened 5 years ago
3
Question: maximum clock?

#20 mikemaikaefer closed 4 years ago
1
4-6 axis feed rate

#19 robomechs opened 5 years ago
1
Perhaps something wrong with $11

#18 robomechs opened 5 years ago
0
Backlash compensation is needed

#17 robomechs closed 4 years ago
0
big issue in communication with GRBL at least with UART

#16 mstrens opened 5 years ago
6
It is not possible to deactivate the internal pull ups for limits

#15 mstrens closed 5 years ago
1
two GRBL welcome message when power is applied

#14 mstrens closed 5 years ago
1
Using UART instead of USB- unneeded code.

#13 mstrens closed 5 years ago
1
Issue with USB

#12 mstrens opened 5 years ago
14
Perhaps a bug

#11 mstrens closed 5 years ago
1
Avoid blocking main loop while sending data via UART

#10 mstrens opened 5 years ago
6
About gcode sender?

#9 viewsat closed 5 years ago
1
Rotary Encoder Jogging

#8 martin2250 opened 5 years ago
2
spindle sync

#7 jschoch closed 5 years ago
1
Hello, is there any tutorial on how to import to atollic, compile and download to bluepill ??

#6 sinfocomp closed 5 years ago
2
Another way to upload

#5 matthew73210 closed 5 years ago
1
Modify Virtual_Com_Port_ConfigDescriptor to allow for more power?

#4 Alfrederson closed 5 years ago
3
Using USART instead of USB (#undef USEUSB)

#3 Lenrockus closed 5 years ago
2
Using Serial1 and USB at the same time?

#2 Alfrederson opened 5 years ago
7
Spindle enable Bit

#1 cncPan closed 5 years ago
5