issues
search
sakuraclamp
/
arducopter
Automatically exported from code.google.com/p/arducopter
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
RTL with AutoApproach
#405
GoogleCodeExporter
closed
8 years ago
8
Values entered in Min and Max at the Mission Planner do not match RATE_D parameter
#404
GoogleCodeExporter
closed
8 years ago
3
Where is the Ports Menu ?
#403
GoogleCodeExporter
closed
8 years ago
5
Loiter/Auto issue
#402
GoogleCodeExporter
closed
8 years ago
10
Wrong adtional Stabilize D param in mission planner
#401
GoogleCodeExporter
closed
8 years ago
4
Swashplate H4
#400
GoogleCodeExporter
closed
8 years ago
14
initial THROTTLE problem in any modes
#399
GoogleCodeExporter
closed
8 years ago
11
may be actual_speed caclculation error
#398
GoogleCodeExporter
closed
8 years ago
1
APM 2.0, Arducopter 2.5.3 Auto mode throttle issue
#397
GoogleCodeExporter
closed
8 years ago
9
THROTTLE_TRIM error causing unpredictable behaviour
#396
GoogleCodeExporter
closed
8 years ago
7
Hex drifted away and could not return, lost and cannot find
#395
GoogleCodeExporter
closed
8 years ago
3
MP value constraints
#394
GoogleCodeExporter
closed
8 years ago
4
APM2... Copter.. 2.5. on a tri-copter..
#393
GoogleCodeExporter
closed
8 years ago
13
GPS module definition
#392
GoogleCodeExporter
closed
8 years ago
4
Problems with tune min and tune max
#391
GoogleCodeExporter
closed
8 years ago
4
One servo turning slower than the others
#390
GoogleCodeExporter
closed
8 years ago
7
Camera and OSD without the MinimOSD
#389
GoogleCodeExporter
closed
8 years ago
2
Arduino Mega 2560
#388
GoogleCodeExporter
closed
8 years ago
1
camera stablization twitching
#387
GoogleCodeExporter
closed
8 years ago
10
APM Planner put some wrong characters in the bluetooth com port
#386
GoogleCodeExporter
closed
8 years ago
3
Compass scaling issue
#385
GoogleCodeExporter
closed
8 years ago
1
Current sensor (90A Attopilot sensor) setttings won't save
#384
GoogleCodeExporter
closed
8 years ago
1
APM 2.0, Mission planner (1.1.50), updating CAM_R_G problem
#383
GoogleCodeExporter
closed
8 years ago
2
MP log erase time info text, minor issue, estimate 30 seconds is too short for 2560
#382
GoogleCodeExporter
closed
8 years ago
2
APM2 - servos don't move for Heli
#381
GoogleCodeExporter
closed
8 years ago
1
some inquirements about quadcopter
#380
GoogleCodeExporter
closed
8 years ago
2
change wp storage format to allow all params - Hit rad and Yaw dissapears in write to AC
#379
GoogleCodeExporter
closed
8 years ago
4
Correct handling for CUT_MOTORS disabled
#378
GoogleCodeExporter
closed
8 years ago
6
RSSI to msgs #35 and #34 to use it on minimOSD
#377
GoogleCodeExporter
closed
8 years ago
5
Use of ch_of_mot in motors_octo.pde
#376
GoogleCodeExporter
closed
8 years ago
2
Stability patch missing for some motor configurations
#375
GoogleCodeExporter
closed
8 years ago
6
My APM2 will not arm the motors until I push the reset button.
#374
GoogleCodeExporter
closed
8 years ago
10
Change triggering for acc and auto level calibration
#373
GoogleCodeExporter
closed
8 years ago
5
Support for Twin-Transverse rotor helis
#372
GoogleCodeExporter
closed
8 years ago
2
Support for Tandem rotor helis
#371
GoogleCodeExporter
closed
8 years ago
3
Loiter altitude stick response - not feeling god
#370
GoogleCodeExporter
closed
8 years ago
6
CH7 Opt always displays DO_NOTHING
#369
GoogleCodeExporter
closed
8 years ago
4
Camera stabilization gains are not editable through mission planner
#368
GoogleCodeExporter
closed
8 years ago
1
Auto-level seems to lose 'trim' after every flight.
#367
GoogleCodeExporter
closed
8 years ago
1
Mission Planner not showing all CH6 options
#366
GoogleCodeExporter
closed
8 years ago
1
AC 2.4.2 tests report: A violent pitch back like a horse at fast speed and drift of the stick neutral after a while
#365
GoogleCodeExporter
closed
8 years ago
4
X8 "crash" - Drift to left
#364
GoogleCodeExporter
closed
8 years ago
5
Loiter seems to work in pulses and all to often "gives up"
#363
GoogleCodeExporter
closed
8 years ago
3
2.4.1 Voltage/Current alarm fix for new APM 2 hardware
#362
GoogleCodeExporter
closed
8 years ago
2
Change entry conditions to Loiter to allow for user input to prevent pitch/roll changes
#361
GoogleCodeExporter
closed
8 years ago
4
RTL doesn't always seem to get exactly to the home location
#360
GoogleCodeExporter
closed
8 years ago
2
Compass Orientation using Mission Planner
#359
GoogleCodeExporter
closed
8 years ago
7
LED support on APM2
#358
GoogleCodeExporter
closed
8 years ago
3
Ranging CH6 options
#357
GoogleCodeExporter
closed
8 years ago
2
Sonar/Baro limit change
#356
GoogleCodeExporter
closed
8 years ago
2
Previous
Next