SparkFun 9 Degrees of Freedom - Sensor Stick

SparkFun 9 Degrees of Freedom - Sensor Stick (SEN-13944)

The SparkFun 9DOF Sensor Stick is a very small sensor board with 9 degrees of freedom. It includes the LSM9DS1 with a simple I2C interface and a mounting hole for attaching it to your project. Also, the board is a mere 0.9" in length, 0.4" in width, and 0.036" thick (0.093" overall), allowing it to be easily mounted in just about any application.

Repository Contents

• /Hardware - All Eagle design files (.brd, .sch)

Documentation

• Installing an Arduino Library Guide - Basic information on how to install an Arduino library.
• Library - Arduino library for the 9DoF Sensor Stick.
• Hookup Guide - Basic hookup guide for the 9DoF Sensor Stick.

License Information

The hardware is released under Creative Commons ShareAlike 4.0 International. The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Distributed as-is; no warranty is given.