SparkFun Thing Plus - ESP32 WROOM (USB-C)
SparkFun Thing Plus - ESP32 WROOM (USB-C) (WRL-20168)
The SparkFun Thing Plus - ESP32 WROOM (USB-C) is a comprehensive development platform for Espressif's ESP32. Thanks to the onboard ESP32 WROOM module, the SparkFun Thing Plus features 16MB of flash memory, 520kB of internal SRAM, an integrated 802.11 BGN WiFi transceiver and dual-mode Bluetooth capabilities, a JST connector to plug in a LiPo battery, a Qwiic connector, and 21 I/O pins. Add to that a rich set of peripherals ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPIs, UARTs, I2S, and I2C.
We took all the good from the original ESP32 Thing Plus and sprinkled on some more. We upgraded to a USB-C connector that provides up to 2A of power, added a fuel gauge IC that will make sure you know your battery levels, included a NeoPixel (WS2812C) RGB LED is the perfect multi-status indicator, and threw a microSD connector on the back! Oh, and the new taller reset and boot buttons are so much easier to push! We even dedicated a voltage regulator to the Qwiic connector, which enables software power control to the Qwiic bus - great for low power logging!
Repository Contents
- /Hardware - Eagle design files (.brd, .sch)
- /Firmware - Example sketches demonstrating extra peripherals
Documentation
- Hookup Guide - Hookup guide for the ESP32 Thing Plus (USB-C).
- SparkFun Graphical Datasheets -Graphical Datasheets for various SparkFun products.
Product Versions
- ESP32 Thing Plus (USB-C variant)
- ESP32 Thing Plus
License Information
This product is open source!
Please review the LICENSE.md file for license information.
If you have any questions or concerns on licensing, please contact technical support on our SparkFun forums.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.