tholeg1 megapirateng issues

tholeg1 / megapirateng

Automatically exported from code.google.com/p/megapirateng2.8

1 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

i coded megapirate 2560 with megapirateNG 2.8 r3.i connected with mission planner everything is working properly.But if i connect battery esc will start beep not able to arm

#71 GoogleCodeExporter opened 9 years ago
0
Camera Gimbal on MegaPirateNG 3.0.1 not working

#70 GoogleCodeExporter opened 9 years ago
1
APM_HAL

#69 GoogleCodeExporter opened 9 years ago
10
Sonar at Mission Planner CLI works but not appearing in flight data

#68 GoogleCodeExporter closed 9 years ago
1
Camer trigger functionality not working in airplane mode (Cruis aiop board)

#67 GoogleCodeExporter opened 9 years ago
0
ArduPlaneNG on Crius AIO Pro v.2

#66 GoogleCodeExporter opened 9 years ago
2
Greatly appreciate for all the good work the MegaPirateNG team has contributed

#65 GoogleCodeExporter closed 9 years ago
1
px4flow sensor port/support

#64 GoogleCodeExporter closed 9 years ago
2
Are you there Alex?

#63 GoogleCodeExporter closed 9 years ago
3
How do i clone the repository?

#62 GoogleCodeExporter closed 9 years ago
2
Sonar Readings wrong

#61 GoogleCodeExporter opened 9 years ago
3
Joystick Control doesn´t work

#60 GoogleCodeExporter opened 9 years ago
1
loiter problems since using 4s LiPo's

#59 GoogleCodeExporter opened 9 years ago
3
Unable to connect MP to Megapirate via 3DR radios.

#58 GoogleCodeExporter opened 9 years ago
7
THANK YOU !!!!

#57 GoogleCodeExporter opened 9 years ago
1
Elevator/Pitch Channel non responsive when loaded on HK Multiwii & Megapirate AIO board

#56 GoogleCodeExporter opened 9 years ago
0
GPS shows location in multiwii and megapirate but aircraft wont function.

#55 GoogleCodeExporter opened 9 years ago
0
Supports different types of models

#54 GoogleCodeExporter opened 9 years ago
0
Accelerometer Calibration r303

#53 GoogleCodeExporter closed 9 years ago
11
THR_Max does not work.

#52 GoogleCodeExporter opened 9 years ago
0
[patch] GPS, Baro:add constructor initialization list

#51 GoogleCodeExporter opened 9 years ago
0
[patch] LeadFilter: remove circular #include

#50 GoogleCodeExporter closed 9 years ago
2
[patch] I2C, RangeFinder add constructor initialization list

#49 GoogleCodeExporter closed 9 years ago
1
[patch] Compass: remove circular #include

#48 GoogleCodeExporter closed 9 years ago
2
[patch] DataFlash: remove circular #include, add constructor initialization list

#47 GoogleCodeExporter closed 9 years ago
1
Alt Hold in Megapirate V2.9 r300 keeps climbing

#46 GoogleCodeExporter opened 9 years ago
21
Motors Disarm shortly after Arm / Takeoff in r299

#45 GoogleCodeExporter closed 9 years ago
5
trimming changes after yaw

#44 GoogleCodeExporter opened 9 years ago
1
Channel 6 pid tuning stopped working in 2.9 rev289

#43 GoogleCodeExporter opened 9 years ago
5
Please include OptFlow Sensor code in MPNG /beta

#42 GoogleCodeExporter opened 9 years ago
2
Unable to build MPNG from /beta on Linux using make

#41 GoogleCodeExporter opened 9 years ago
11
2.9R6 Arming problem with 3DR radio

#40 GoogleCodeExporter opened 9 years ago
3
Gimbal outputs don't work

#39 GoogleCodeExporter closed 9 years ago
2
Disarming when flying in stab mode!

#38 GoogleCodeExporter opened 9 years ago
103
PPM Error Meesage

#37 GoogleCodeExporter closed 9 years ago
3
Improving FRSKY Telemetry (Open9x - firmware) with MegapirateNG

#36 GoogleCodeExporter opened 9 years ago
2
Sonar stop working after upgrade to MegaPirateNG V2.9 R6

#35 GoogleCodeExporter closed 9 years ago
1
Loiter Issues update

#34 GoogleCodeExporter opened 9 years ago
1
FRSKY PPM channel 1 reseting to center.

#33 GoogleCodeExporter opened 9 years ago
2
2.9 R5 BMP085 negative alt on FREEIMU.

#32 GoogleCodeExporter opened 9 years ago
0
Camera Gimbal Jittery while Craft on ground with 2.9 rev5

#31 GoogleCodeExporter closed 9 years ago
2
Crius AIO Tri Copter yaw servo not work MegaPirateNG

#30 GoogleCodeExporter closed 9 years ago
11
LOITER

#29 GoogleCodeExporter opened 9 years ago
0
Gimbal servo twitch

#28 GoogleCodeExporter closed 9 years ago
6
controls freezed

#27 GoogleCodeExporter opened 9 years ago
2
Fail with acc calibration

#26 GoogleCodeExporter opened 9 years ago
5
Tri Copter yaw servo does not work MegaPirateNG_2.8_R3

#25 GoogleCodeExporter opened 9 years ago
5
mpNG 2.9 rev 173 -could not build using Arduino 1.03

#24 GoogleCodeExporter closed 9 years ago
4
increased the throttle by itselfs and flip over

#23 GoogleCodeExporter opened 9 years ago
5
cam stabilisation doesn´t work

#22 GoogleCodeExporter closed 9 years ago
3