linuxpy
Human friendly interface to linux subsystems using python.
Provides python access to several linux subsystems like V4L2, GPIO, Led, thermal, input and MIDI.
There is experimental, undocumented, incomplete and unstable access to USB.
Requirements:
- python >= 3.9
- Fairly recent linux kernel
- Installed kernel modules you want to access
And yes, it is true: there are no python libraries required! Also there are no C libraries required. Everything is done here through direct ioctl, read and write calls. Ain't linux wonderful?
Installation
From within your favorite python environment:
$ pip install linuxpyTo run the examples you'll need:
$ pip install linuxpy[examples]To develop, run tests, build package, lint, etc you'll need:
$ pip install linuxpy[dev]Subsystems
Video
Video for Linux 2 (V4L2) python library
Without further ado:
>>> from linuxpy.video.device import Device
>>> with Device.from_id(0) as cam:
>>> for i, frame in enumerate(cam):
... print(f"frame #{i}: {len(frame)} bytes")
... if i > 9:
... break
...
frame #0: 54630 bytes
frame #1: 50184 bytes
frame #2: 44054 bytes
frame #3: 42822 bytes
frame #4: 42116 bytes
frame #5: 41868 bytes
frame #6: 41322 bytes
frame #7: 40896 bytes
frame #8: 40844 bytes
frame #9: 40714 bytes
frame #10: 40662 bytesGetting information about the device:
>>> from linuxpy.video.device import Device, BufferType
>>> cam = Device.from_id(0)
>>> cam.open()
>>> cam.info.card
'Integrated_Webcam_HD: Integrate'
>>> cam.info.capabilities
<Capability.STREAMING|EXT_PIX_FORMAT|VIDEO_CAPTURE: 69206017>
>>> cam.info.formats
[ImageFormat(type=<BufferType.VIDEO_CAPTURE: 1>, description=b'Motion-JPEG',
flags=<ImageFormatFlag.COMPRESSED: 1>, pixelformat=<PixelFormat.MJPEG: 1196444237>),
ImageFormat(type=<BufferType.VIDEO_CAPTURE: 1>, description=b'YUYV 4:2:2',
flags=<ImageFormatFlag.0: 0>, pixelformat=<PixelFormat.YUYV: 1448695129>)]
>>> cam.get_format(BufferType.VIDEO_CAPTURE)
Format(width=640, height=480, pixelformat=<PixelFormat.MJPEG: 1196444237>}
>>> for ctrl in cam.controls.values(): print(ctrl)
<IntegerControl brightness min=0 max=255 step=1 default=128 value=128>
<IntegerControl contrast min=0 max=255 step=1 default=32 value=32>
...
<BooleanControl exposure_dynamic_framerate default=False value=False>
>>> cam.controls.brightness
<IntegerControl brightness min=0 max=255 step=1 default=128 value=128>
>>> cam.controls.brightness.value = 64
>>> cam.controls.brightness
<IntegerControl brightness min=0 max=255 step=1 default=128 value=64>(see also v4l2py-ctl example)
asyncio
linuxpy.video is asyncio friendly:
$ python -m asyncio
>>> from linuxpy.video.device import Device
>>> with Device.from_id(0) as camera:
... async for frame in camera:
... print(f"frame {len(frame)}")
frame 10224
frame 10304
frame 10224
frame 10136
...(check basic async and web async examples)
gevent
linuxpy.video is also gevent friendly:
$ python
>>> from linuxpy.io import GeventIO
>>> from linuxpy.video.device import Device
>>> with Device.from_id(0, io=GeventIO) as camera:
... for frame in camera:
... print(f"frame {len(frame)}")
frame 10224
frame 10304
frame 10224
frame 10136
...(check basic gevent and web gevent examples)
Video output
It is possible to write to a video output capable device (ex: v4l2loopback). The following example shows how to grab frames from device 0 and write them to device 10
>>> from linuxpy.video.device import Device, VideoOutput, BufferType
>>> dev_source = Device.from_id(0)
>>> dev_sink = Device.from_id(10)
>>> with dev_source, dev_target:
>>> source = VideoCapture(dev_source)
>>> sink = VideoOutput(dev_sink)
>>> source.set_format(640, 480, "MJPG")
>>> sink.set_format(640, 480, "MJPG")
>>> with source, sink:
>>> for frame in source:
>>> sink.write(frame.data)Bonus track
You've been patient enough to read until here so, just for you, a 20 line gem: a flask web server displaying your device on the web:
$ pip install flask# web.py
import flask
from linuxpy.video.device import Device
app = flask.Flask('basic-web-cam')
def gen_frames():
with Device.from_id(0) as cam:
for frame in cam:
yield b"--frame\r\nContent-Type: image/jpeg\r\n\r\n" + frame.data + b"\r\n"
@app.route("/")
def index():
return '<html><img src="https://github.com/tiagocoutinho/linuxpy/raw/master/stream" /></html>'
@app.route("/stream")
def stream():
return flask.Response(
gen_frames(), mimetype='multipart/x-mixed-replace; boundary=frame')run with:
$ FLASK_APP=web flask run -h 0.0.0.0Point your browser to 127.0.0.1:5000 and you should see your camera rolling!
v4l2loopback
Start from scratch:
# Remove kernel module and all devices (no client can be connected at this point)
sudo modprobe -r v4l2loopback
# Install some devices
sudo modprobe v4l2loopback video_nr=20,21 card_label="Loopback 0","Loopback 1"References
See the linux/videodev2.h header file for details.
Input
API not documented yet. Just this example:
import time
from linuxpy.input.device import find_gamepads
pad = next(find_gamepads())
abs = pad.absolute
with pad:
while True:
print(f"X:{abs.x:>3} | Y:{abs.y:>3} | RX:{abs.rx:>3} | RY:{abs.ry:>3}", end="\r", flush=True)
time.sleep(0.1)asyncio
$ python -m asyncio
>>> from linuxpy.input.device import find_gamepads
>>> with next(find_gamepads()) as pad:
... async for event in pad:
... print(event)
InputEvent(time=1697520475.348099, type=<EventType.SYN: 0>, code=<Synchronization.REPORT: 0>, value=0)
InputEvent(time=1697520475.361564, type=<EventType.REL: 2>, code=<Relative.X: 0>, value=-1)
InputEvent(time=1697520475.361564, type=<EventType.REL: 2>, code=<Relative.Y: 1>, value=1)
InputEvent(time=1697520475.361564, type=<EventType.SYN: 0>, code=<Synchronization.REPORT: 0>, value=0)
InputEvent(time=1697520475.371128, type=<EventType.REL: 2>, code=<Relative.X: 0>, value=-1)
InputEvent(time=1697520475.371128, type=<EventType.SYN: 0>, code=<Synchronization.REPORT: 0>, value=0)
...References
MIDI Sequencer
$ python
>>> from linuxpy.midi.device import Sequencer, event_stream
>>> seq = Sequencer()
>>> with seq:
port = seq.create_port()
port.connect_from(14, 0)
for event in seq:
print(event)
14:0 Note on channel=0, note=100, velocity=3, off_velocity=0, duration=0
14:0 Clock queue=0, pad=b''
14:0 System exclusive F0 61 62 63 F7
14:0 Note off channel=0, note=55, velocity=3, off_velocity=0, duration=0asyncio
asyncio is a first class citizen to linuxpy.midi:
$ python -m asyncio
>>> from linuxpy.midi.device import Sequencer, async_event_stream
>>> seq = Sequencer()
>>> with seq:
port = seq.create_port()
port.connect_from(14, 0)
async for event in async_event_stream(seq):
print(event)
14:0 Note on channel=0, note=100, velocity=3, off_velocity=0, duration=0
14:0 Clock queue=0, pad=b''
14:0 System exclusive F0 61 62 63 F7
14:0 Note off channel=0, note=55, velocity=3, off_velocity=0, duration=0CLI
A basic CLI is provided that allows listing MIDI clients & ports and dumping MIDI sequencer events:
$ python -m linuxpy.midi.cli ls
Port Client Port Type Capabilities
0:0 System Timer 0 SR, W, R
0:1 System Announce 0 SR, R
14:0 Midi Through Midi Through Port-0 PORT, SOFTWARE, MIDI_GENERIC SW, SR, W, R$ python -m linuxpy.midi.cli listen 0:1 14:0
0:1 Port subscribed sender=(client=0, port=1), dest=(client=128, port=0)
0:1 Port start client=128, port=1
0:1 Port subscribed sender=(client=14, port=0), dest=(client=128, port=1)
0:1 Client start client=130, port=0
0:1 Port start client=130, port=0
0:1 Port subscribed sender=(client=130, port=0), dest=(client=14, port=0)
14:0 Note on channel=0, note=100, velocity=3, off_velocity=0, duration=0
0:1 Port unsubscribed sender=(client=130, port=0), dest=(client=14, port=0)
0:1 Port exit client=130, port=0
0:1 Client exit client=130, port=0
0:1 Port exit client=129, port=0
0:1 Client exit client=129, port=0
0:1 Client start client=129, port=0
0:1 Port start client=129, port=0
14:0 Note on channel=0, note=100, velocity=3, off_velocity=0, duration=0
14:0 Note on channel=0, note=0, velocity=255, off_velocity=0, duration=0
14:0 Note on channel=0, note=0, velocity=255, off_velocity=0, duration=0