tyhenry CheapStepper issues

tyhenry / CheapStepper

Arduino library for the cheap but decent 28BYJ-48 5v stepper motor with ULN2003 board

GNU General Public License v3.0

122 stars 46 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Off function not listed / includeded when downloaded from library managers

#29 voxpop9 opened 3 weeks ago
0
Increasing number of steps

#28 sigmapi332 opened 2 years ago
0
Port to Golang

#27 miathedev closed 2 years ago
0
Add an option to ignore limits with a define

#26 Duckle29 opened 3 years ago
0
Add a function to set delay directly

#25 Duckle29 closed 3 years ago
0
Crashing on NodeMCU

#24 patrickjane opened 3 years ago
3
Platform io

#23 kolod closed 3 years ago
1
Fix restarts on ESP devices

#22 maxim-kukushkin opened 4 years ago
2
Make non-blocking moves actually non-blocking and fix rpm

#21 Smeat opened 4 years ago
0
seq method updated to save memory

#20 mrv96 opened 4 years ago
0
After any move the stepper remains in a high current state

#19 drp0 opened 4 years ago
3
newMoveTo does not work correctly with toStep less than current position

#18 drp0 opened 4 years ago
0
newMoveToDegree Int overflow in toStep variable

#17 drp0 opened 4 years ago
3
"Centering" the stepper motor

#16 drp0 opened 4 years ago
2
New methods newMoveToWithinOneRound, newMoveToDegreeWithinOneRound, fixed doc.

#15 mariansoban opened 4 years ago
0
README references dead link

#14 Semnodime closed 4 years ago
1
Off Method

#13 WerFra closed 5 years ago
0
Fix the constructor

#12 GeeF closed 5 years ago
1
Problem using other pins besides defaults

#11 Eddiiie closed 5 years ago
1
Error in cheapstepper library

#10 Ooip83 closed 6 years ago
1
Two steppers issue

#9 AndyGFX closed 5 years ago
2
newMoveDegrees in minus

#8 ghost opened 6 years ago
2
Reset position to 0

#7 ChazSingh closed 5 years ago
1
Motor with different pins

#6 pierdr closed 5 years ago
1
Object Initializers issue

#5 ghost closed 5 years ago
2
Formatting in README.md

#4 zimnyjakub closed 6 years ago
1
Reset Loop while using WebServer on 8266

#3 neuhoffm-sh opened 7 years ago
5
CheapStepper::move/newMove - numSteps should the long instead of int

#2 matonym opened 7 years ago
1
Setting 4 non default pins does not work and a 2 motor example would be useful

#1 drp0 closed 7 years ago
4