Tethers.jl

Introduction

A few examples where tether models can be useful:

• cranes
• undersea cables
• mooring lines of floating wind turbines
• airborne wind energy systems
• launching of sailplanes

Modeling of tethers and cables is difficult for several reasons. One of them is the high stiffness of the equation systems that need to be solved. I tried to implement these models with Simulink and Modelica and failed. It is possible to implement these models with Julia or Python. How to do this is explained in this tutorial. Tethers that are reeled in and out from a winch are even more challenging to model than constant-length tethers.

A series of examples, from a simple falling mass towards a tether model, consisting of point masses connected by spring damper elements with the support of reel-out and reel-in and aerodynamic drag attached shall be presented.

-- WORK IN PROGRESS --

Installation

1. make sure you are running a bash terminal (shell) and you have at least 16GB RAM (MAC, Linux and Windows supported).
   On Windows, you can use git for windows which provides git AND a bash shell, but for using Julia from a bash terminal you must also install either Installation and usage of VSCode or Windows Terminal. Windows Terminal is the simple and clean solution, VSCode the comfortable, fancy solution.
2. install Julia 1.10 using juliaup, see https://github.com/JuliaLang/juliaup. If juliaup is already installed, the following commands will do:

   juliaup add 1.10
   juliaup default 1.10 

Check out from git:

cd repos # any folder of your choice, but without spaces in the folder name
git clone https://github.com/ufechner7/Tethers.jl

Build the system image:

cd repos/Tethers.jl
cd bin
./create_sys_image

Basic example

Use the provided script to start Julia from the Tethers.jl folder:

cd repos/Tethers.jl
./bin/run_julia

From the Julia prompt, run the simulation:

include("src/Tether_01.jl")

You should see a plot similar to:

This example shows a mass that is thrown upwards, slows down and then falls.

HINT
You get a menu from which you can run any of the examples by typing

menu()

at the Julia prompt.

Julia code: Tether_01.jl

Python version as comparison

From the Julia prompt execute:

include("src/RunTether.jl")

This will install Python, Matplotlib and Assimulo and execute the script Tether_01.py.

Python code: Tether_01.py

If you compare the Python and the Julia scripts you can see that:

• the Julia script is shorter and easier to read
• Julia is about 16 times faster when running the simulation

Have a look at the Examples that teach you how to construct a full tether model step by step.

Overall comparison

Execution time for a simulation of 10s duration with logging the state every 20ms. Relative and absolute tolerance: $1.0^{-6}$. CPU: Ryzen 9 7950X.

Tradeoff Julia vs Python: In Julia, the code is compiled before it is executed, which can cause about one to 10 seconds delay when running a simulation the first time, but speeds up the execution a lot afterward. In addition, Julia can run fully multithreaded, Python cannot make use of multiple CPU cores with multithreading because of the global interpreter lock.

Furthermore, the IDA solver is hardly capable of handling a simulation with the very stiff Dyneema tether. It achieves only 0.24% of the performance of the Julia solvers.

See also: Why Julia? and read the documentation.