Enphase Envoy Installer
![HACS Custom](https://img.shields.io/badge/HACS-Custom-41BDF5.svg?style=for-the-badge)
This is a HACS custom integration for enphase envoys with firmware version 7 and up.
Especially made to provide extra functionality with your installer or DIY account.
If you want to use the integration with a Home Owner account (with less functionality), select the option during configuration.
Features:
- Individual device per inverter with all information available.
- Individual device per Q-relay with relay status.
- Individual device per battery with information available.
- Production switch to turn on/off solar power production. :one:
- Firmware update sensor.
- 3 Phase CT readings.
- "Realtime" updates of CT readings.
- Configurable polling interval.
- Optional negative production reading correction.
- Service call to retrieve and set grid profile.
:one: Some Enphase installations suffer from an issue where production only restarts the next morning. This is not an issue with this integration.
Screenshots
![inverter_sensors](https://github.com/vincentwolsink/home_assistant_enphase_envoy_installer/assets/1639734/d0033e75-6b89-46dd-bf1e-449bbca957f2)
Installation
![Open your Home Assistant instance and open a repository inside the Home Assistant Community Store.](https://my.home-assistant.io/badges/hacs_repository.svg)
Or follow these steps:
- Install HACS if you haven't already
- Add this repository as a custom integration repository in HACS
- Restart home assistant
- Add the integration through the home assistant configuration flow
Credits
Based on work from @briancmpbll