-
the issue metioned on:
https://github.com/litex-hub/linux-on-litex-rocket/issues/40#issue-2324887509
i found the arty.dts had a node with interrupts-extended:
```
L1: interrupt-controller@c0000…
-
Hello,
i tried using this project for Programming a custom artix-7 board via a J-Link Programming Cable.
I installed it in my msys2 with command "pacman -S mingw-w64-ucrt-x86_64-openFPGALoader"
…
-
I have followed the instructions in the readme so far but when it comes to loading the bitstream to the Arty A7-100 I get errors.
When I run `./make.py --board=arty --load` i get this error:
`Tr…
-
![image](https://github.com/litex-hub/linux-on-litex-vexriscv/assets/170522054/4bfc60c1-9c52-4d4c-bff9-abb332f085c2)
i connected the board and I got this issue after running ./make.py --board=arty --…
-
Can we have support for synthesising necessary files for the 100t variant of digilent arty kit?
-
Everything seems to work with booting Linux on the Arty A100T but the booting process is very at some point (see the attached file). It does not seems to be normal even with such a slow board and to b…
-
Hello there,
when executing following command in the litex-boards directory, the NEORV32 CPU Type is compiled and flashed to my Arty A7-100T:
`./digilent_arty.py --variant=a7-100 --cpu-type=neorv3…
vogma updated
6 months ago
-
So I was trying to run some benchmarks to compare BlackParrot/VexRiscv/Rocket.
Unfortunately I'm running into this issue:
```Initramfs unpacking failed: invalid magic at start of compressed archiv…
-
OS system : Ubuntu 22.04 ( Vivado v2024.1 64-bit )
project release : commit cdca76bbeebe8ea02333fd41829ffdf69d21a03c ( Linux kernel 6.9.6 )
project build : make CONFIG=rocket64b1 BOARD=arty-a7-100t…
-
We followed the steps of readme completely, firstly we execute the command (make CONFIG=rocket64b2 BOARD=arty-a7-100t vivado-gui )to generate the system arty a7-100t. tcl file,
and then executing the…