-
I am using a 6c flight controller. I increased the frequency of the imu through commands. However, when testing automatic takeoff, it still prompts that the frequency is too low and the odometer speed…
-
## Expected Behavior
With previous version
-
### Describe the bug
**Topic 1:**
When handling large files (> 2 GB) unexpected behavior can occur.
The observed behavior in this case was an error reported due to: `No space left on device` when…
-
Hi everyone,
I’m working on configuring an iNav-based flight controller for my drone and aiming to control its movement using a Raspberry Pi with the pymavlink library. I’ve already connected the R…
-
### Feature type
General information
### Description
Some bot commands are very long and not only take up a lot of space on the screen but also take away the attention from the link to the do…
-
## Task
Post test flight we need to take the commands, variables, and base code found in (not exclusive...):
inner_frame_power.c/h
outer_frame_power.c/h
motor_box_power.c/h
commands.c
command_st…
-
### Describe the bug
I opened a terminal and type the command"PX4_SYS_AUTOSTART=4001 PX4_SIM_MODEL=gz_x500 ./build/px4_sitl_default/bin/px4 -i 1" to create a new UAV named"px4_1", open the UDP and QG…
-
### Describe the bug
I've notice irregular calls in wq:**rate_ctrl** when **px4io** drive is running.
For example, **control_allocation** is expect to run `2.5 [ms]` loop but for every `1 [s]` it…
-
**Type of issue**: bug report | feature request | other enhancement
Bug report
**Impact**: no functional change | API addition (no impact on existing code) | API modification | unknown…
-
## Current Behavior
I fly my multicopter to missions trying to get some nice videos. Unfortunately the multicopter jumps abruptly at every waypoint especially at terminal ones (eg waypoint 3 at my im…
cptX updated
2 months ago