-
Hello Kris,
Do you happen to know where one can download Application Notes for the MPU9250 and AK8963?
It looks like they are no longer available at https://www.invensense.com/developers/ (even tho…
-
Hi,
I am using ICM-20948 by TDK InvenSense, which has on board digital motion processing unit. My host processor is MediaTek MT-2523G.
InvenSense provides DMP firmware, that has to be programed on D…
zq649 updated
5 years ago
-
There are some parts with QFN package, where the leads at the corner would normally be too close (or even overlap sometimes), due to the small body size. These packages usually define a corner lead-to…
-
Request for support for the Invensense MPU6050 (now officially part of TDK) 6DoF I²C sensor.
Datasheet : https://www.invensense.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf
supported by No…
DoNck updated
4 years ago
-
**Describe the bug**
I was trying to build px4 for navio2 in raspberry pi 4 model b,
I am getting errors as follows after running -> make emlid_navio2
I followed some previously reported issues …
-
Invensense recently released a carrier board
https://invensense.tdk.com/products/dk-20948/
I was wondering how i could hook up to this repo.
-
Is the [libInvnAlgoAGM.a](https://github.com/VaderMester/ESP32-ICM426XX-driver/blob/master/components/ICM426XX/lib/libInvnAlgoAGM.a) file compiled for the ESP32 with ESP-IDF or was it taken from the T…
-
#### Issue details
execution time of AP_InertialSensor_Invensense::_read_fifo() can be up to 1286uS so it is hard to schedule it at 1KHz. So I propose the following optimization, which will reduce …
-
Please add two I2S MEMS microphones (e.g. [Invensense ICS-43432](https://www.invensense.com/wp-content/uploads/2015/02/ICS-43432-data-sheet-v1.3.pdf) or [Knowles SPH0645LM4H-B](http://www.knowles.com…
renne updated
6 years ago
-
Hi.
I was wondering if you had made any comparison on these 3 chips, especially in terms of the magnetometer, which has been a big problem for me on the Invensense in terms of error.