-
Hi,
I'm trying to upload PULPissimo hello example on zcu102 board. Why the need for an external JTAG-HS2 adapter since connector J83 and J2 of zcu102 board support JTAG?
Anyway I've only DLC9LP X…
-
Commit 87d5764f brought rv_dm and lc_ctrl to be on the same xbar_dbg, which makes use of the existing TL-UL infrastructure. My recent PR #24758 returns the JTAG DPI interface back to the Darjeeling V…
-
```
It would be great to see a second firmware with the same pin layout as the
original USBprog.
I'm using USBprog in combination with the 5V->3.3V level-shifter
(http://svn.berlios.de/svnroot/repos/…
-
hi!
After I have finished the compilation of rtl and prog/test.c by using vcs and gcc, i run the command "`//opt/openocd/bin/openocd -f dm_compliance_test.cfg`". And it is giving the output like this…
-
### Development Kit
Custom
### Module or chip used
ESP32-WROVER-E
### Debug Adapter
nanoDAP-HS
### OpenOCD version
v0.12.0-esp32-20240318
### Operating System
ArchLinux
### Using an IDE ?
v…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
nanoDLA can be also used as a JTAG Adapter. (only JTAG , no SWD for now)
operation confirmed with both v1.2 and v1.3
https://github.com/elfmimi/ixo-usb-jtag/releases/tag/v0.0.1%2B
-
I'm running a Raspberry Pi 4b with the Kali ARM image flashed onto my SD drive.
Downloaded the repo, ran make (with seemingly no issue) and now I get the following when trying to run `make flash`:
…
-
I am using Raspberry Pi Pico W with openocd-dirtyjtag and trying to flash/debug NXP LPC1837. Got the following error when I try to start openocd. Please help me in resolving it.
```
iotdev@iotdev:…
-
```
$ openocd -f ./ocd-stm32.cfg -f target/stm32g0x.cfg
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : aut…