-
Hi,
Sorry if my question is stupid,
I'd like to setup an "Arduino Bridge" between an RC Car WLtoys K989 and a computer.
Sending WebSocket/HTTP command to the Arduino then to the RC Car Receiver…
-
### The problem
HI,
Got an 433Mhz RF emitter and receiver on an ESP32.
Both my emitter and receiver are working properly.
I'm capturing this data (protocol:8) from my remote :
`[I][remote.rc_sw…
-
### The problem
Hi there, I have tried a lot of time, to fix this problem by myself
I have a Novy Hood and a Novy 840029 RF Controller.
I have flashed ESP-Home on my Sonoff RF Bridge and instal…
-
I want to switch from Spektrum RC radios to FRSky radios, but my system requires the ability to send text messages from the remote system to the transmitter.
Spektrum has this capability - 9 lines of…
-
I setup my receiver as to send 850 value while radio signal lost to trigger failsafe rth.
I found that rather than going into failsafe rth quad stops and fell while I turn off radio.
In osd it says…
-
## Bug report
**Issue details**
_Please describe the problem_
After installing the stable Ardurover 4.4 firmware, I have the B/E FMU red LED blinking, is there any way to remove the red LED b…
-
**Idea**
You have a *low-power* USB power supply and a *powerful* LED power supply that only needs power when the LEDs are on.
[**Fork link**](https://github.com/GlitchPunkWTF/WLED/) | [**Commit l…
-
I have a 4 in 1 RM TX16s and an RM Pocket with a 4 in 1 module. I have set up the wireless trainer facility successfully in both directions i.e TX16s to Pocket and Pocket to TX16s by swapping the 4 i…
-
**Describe the problem you have/What new integration you would like**
Remote transmitter rc protocol should allow more than 2 values for sync and other field lists.
**Please describe your us…
-
- Z range (throttle)
- stick throttle range [-1, 1] …
dagar updated
3 months ago