-
Similar to the Sainsmart IP relay board, I was hoping for a module for the Sainsmart 16 channel usb relay board.
[https://www.amazon.com/SainSmart-16-Channel-9-36V-Relay-Module/dp/B0793MZH2B/ref=asc_…
-
Are there any persons out there who have a SainSmart 3018 PRO?
I use Candle 1.17.1 and am looking to converse with others.
-
Heya,
I went down the rabbit hole of trying to understand your code in order to get rtl_433 to be able to parse our weather stations. Turns out my model has a different preamble than yours, and the…
-
Hello,
I just acquired a small CNC 3018 Prover from SainSmart, I have two concerns. Only for single and double-sided PCBs.
The first: When I engrave a pcb and reposition the machine to the zero …
-
The new camera (SainSmart IMX219) did not work with Pi Model 3 A+ (Raspbian Buster Lite 2020-02-13).
Error:
```
pi@raspberrypi:~ $ raspistill -o image.jpg
mmal: mmal_vc_component_enable: failed to…
-
Hi, I have a Sainsmart device and I am trying to get it working. So far your firmware seems to be running correctly with the exception of not outputting any valid samples (I modified the sigrok versio…
-
* sainsmart version: Current
* Python version: 3.7.3
* Operating System: Raspbian (Debian)
### Description
from sainsmart import devices
Works fine Python2
Python3 error "no module named sains…
-
Hi Carlos,
I built your good project but I'm an issue in using it with my controller in subject (accepting all standard command). The "move" commands don't work at all, a part the "home" command that…
-
Im new to CNC Im using a Sainsmart Genmitsi 3030Pro with g sender, Vcarve desktop 12, windows 11
I was able to carve 2 small projects but after trying another the machine made a noise and would not…
-
Hi,
First of all, i really appreciate the effort you have put in creating these drivers. I am doing a pet project to drive st7735 sainsmart 1.8 inch tft using stm32f103c8T6 minimum system eval boar…