-
Hi
I hope you are in good health. I am also working on model predictive control. It is very difficult to implement NMPC into simulink without using any toolbox or solver. Do you have any simple exa…
-
when splitting clusters, the mean waveform displayed is that of the lowest channel/site number in the cluster, when it should be the max site. this leads to some questionable splitting when the lowest…
-
```
What steps will reproduce the problem?
Robotics, Vision and Control (corrected second printing), Peter Corke - page
#22 MATLAB example:
>> T1 = se2(1,2,30*pi/180)
T1 =
0.8660 -0.5000 …
-
```
What steps will reproduce the problem?
Robotics, Vision and Control (corrected second printing), Peter Corke - page
#22 MATLAB example:
>> T1 = se2(1,2,30*pi/180)
T1 =
0.8660 -0.5000 …
-
when splitting clusters using feature projection, the split always seems to be a time cut off
in addition to that, the clusters which appear to be distinct, are still present after cutting.
this h…
-
I am using the device to stream the T265 pose and I wanted to stream the data in Simulink using [WB Toolbox](https://github.com/robotology/wb-toolbox).
The issue is that I had to launch the devic…
-
```
What steps will reproduce the problem?
Robotics, Vision and Control (corrected second printing), Peter Corke - page
#22 MATLAB example:
>> T1 = se2(1,2,30*pi/180)
T1 =
0.8660 -0.5000 …
-
```
What steps will reproduce the problem?
Robotics, Vision and Control (corrected second printing), Peter Corke - page
#22 MATLAB example:
>> T1 = se2(1,2,30*pi/180)
T1 =
0.8660 -0.5000 …
-
```
What steps will reproduce the problem?
Robotics, Vision and Control (corrected second printing), Peter Corke - page
#22 MATLAB example:
>> T1 = se2(1,2,30*pi/180)
T1 =
0.8660 -0.5000 …
-
```
What steps will reproduce the problem?
Robotics, Vision and Control (corrected second printing), Peter Corke - page
#22 MATLAB example:
>> T1 = se2(1,2,30*pi/180)
T1 =
0.8660 -0.5000 …