-
## Current Behavior
When activating the GEPRC M1025-DQ GPS, DPS310 barometer on my SpeedyBee F7 V3 stack with iNav 7.1.1, a red icon appears next to the barometer status and the ESC continu…
-
**Bug Report**
Filing a bug report from the original thread here: http://discuss.px4.io/t/uncommanded-throttle-cut-during-flight/5852
Several people have experienced an unexpected / commanded thrott…
-
## :exclamation: About
💡 For the upcoming v1.14 release, we are asking the Community for flight tests. This issue will be used for keeping track of all the tests from the Community.
If you're unsu…
-
Hello, I want to use your PhoenixDrone PX4 code to control my tailsitter. When I execute`make nuttx_px4fmu-v4_tailsitter` I encounter an error that
`-- nuttx-px4fmu-v4-tailsitter
-- CMAKE_INSTALL…
-
Hii there,
I m a newbie.
I am trying to control Tailsitter UAV using MATLAB Simulink. I designed a controller in Simulink that gives the command to the actuators (required forces and moments) v…
-
We recently updated the video of the AX1800 flight (in…
-
**Describe the bug**
The ESC calibration routine seems to output PWM_MAX for a number of seconds after plugging in the battery, then drops to the disarmed value. This results in a calibration abort i…
-
VTOL Quad Tailsitters
## Problem
VTOL Quad Tailsitters without elevons (control surfaceless) are not supported by PX4. Examples of such aerial vehicles with this design include the Swan K1. A …
-
**Describe the bug**
Using the cube orange configured as a VTOL tailsitter with DSHOT300 configuration and the ESC's are connected via AUX 1-4 output (SYS_USE_IO=0) the ESC'S are not getting signal a…
-
- tailsitter https://github.com/PX4/PX4-Autopilot/actions/runs/3069018157/jobs/4957176163
- tailsitter https://github.com/PX4/PX4-Autopilot/actions/runs/3100195832/jobs/5020202600
- tailsitter ht…
dagar updated
2 years ago