-
Hi,
The **TFT35 E3 v3.0.1** connected to **SKR3-EZ** shows **"no printer attached"**
### SKR3-EZ
Using the latest marlin firmware with the following changes:
- file: Configuration.h
```cpp
#de…
-
Hi everyone, I have an issue with my newly assembled printer. I have checked the connections multiple times and couldn't find any issues with the wiring. When I try to perform Home All or Home X/Y, I …
-
# Version Number
REV04
# Bugfix or Enhancement
Enhancement
# Description
The TMC2209 stepper drivers in the Pololu stepper driver format have worked well, but they are very costly, depend on …
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Build a 3D-printer with quad Z stepper and quad Z stop. Each stepper has its own driver (TMC2…
-
Hi,
in your config, you use TMC2209_STANDALONE drivers.
![image](https://user-images.githubusercontent.com/35131193/227797146-311e22c4-d186-40df-b530-bfb820c75634.png)
In the same file (https…
-
I have a Lerdge TMC2226 that seems to be fully compatible with all tmc2209 libraries. I'm trying to read SG_RESULT() to make measurements of the current for calibration purposes (and some features, bu…
-
I have an ebb36 connected to a u2c.
All fans and end stops work.
heater and thermistor works.
The only thing I can’t get working is the extruder tmc2209. Using the config from the GitHub with P…
-
Hi! I have a MKS TMC2209 v2.0 silentstepstick driver connected to a custom PCB that I made.
I am using the [TMC2209 arduino](https://github.com/janelia-arduino/TMC2209) library to communicate with my…
-
Printer: Creality CR20
Board: SKR 1.4 Turbo (BigTreeTech)
Driver: TMC2209 (BigTreeTech)
Driver Config: UART
### **Error:**
`M112`
```
Recv: Driver registers:
Recv: X 0x00:00:00:00 Bad r…
-
I was working on Arduino Uno using TMC2209 to run a stepper motor and to control it's current using UART, but the current is not being set at all with rms_current(). I've checked the wiring and it's a…