-
I see there is a [CST861S driver](https://github.com/zephyrproject-rtos/zephyr/blob/4d0a8c1e8b8316ec5071a3fcc98cd292d3bc4e6d/drivers/input/Kconfig.cst816s#L4) which is supported by [Zephyr](https://do…
-
How do I install CANHAT from waveshare on `CB1`. I believe it needs
```
dtparam=spi=on
dtoverlay=mcp2515-can0,oscillator=12000000,interrupt=25,spimaxfrequency=1000000
```
but not sure how to g…
-
### CircuitPython version
```python
Adafruit CircuitPython 9.2.0 on 2024-10-28; Waveshare ESP32-S3-Zero with ESP32S3
```
### Code/REPL
```python
def read_packet():
global packet
try:
…
-
**Is your feature request related to a problem? Please describe.**
Yes, The current driver for the Waveshare 2.7inch do not work with V2 hardware
**Describe the solution you'd like**
The vendor …
-
The connectors do not fit together. If this is expected it would be good to extend the instruction to trim the connector.
, SuperSlicer crashes when I slice it. Here are two files that it repros with:
https://github.com/VoronDesig…
-
Any chance for an update for this screen, I've tried to install the the driver from their site but no luck.
Thanks
-
What would be involved with supporting waveshare-rp2040-eth? Tinygo already supports the waveshare-rp2040-zero.
https://www.waveshare.com/rp2040-eth.htm
Is it basically a waveshare-rp2040-zero w…
-
### Description
Add suport inverter type Solax X3-MIC (model: X3-9.0-T-D) SN: MU902T
### Suggested Solution
Hello It is posible add suport Solax X3-MIC sn MU902T******** mayby protocol is sim…
-
### Manufacturer
Waveshare
### Model
Model A
### Model ID
_No response_
### HW Version
_No response_
### Battery Type
18650
### Battery Quantity
2
uvjim updated
10 hours ago