-
Hi all,
I was following the instructions from [here](https://github.com/Xilinx/Vitis-AI/tree/master/setup/vck190) to flash the VCK190 image to an SD card, and then the instructions from [here](http…
-
**Describe the bug**
When running the command `FPGA_HOST=localhost XIL_HW_SERVER_PORT=3121 make fpga-program`, I get the following error:
```
INFO generating programming script for XC7VX485T
I…
-
**Describe the bug**
cannot upload neorv32_exe.bin for demo CFS with nexys-a7-test-setup. The upload process freezes
**To Reproduce**
Switch IO_CFS_EN=true in neorv32_top.vhd then restart synthes…
JC-LL updated
9 months ago
-
CheckPoint Safe@Office 1000n:
Quite similar just with slower 300MHz CPU and SFP connector but without WLAN. Discovered the same internal serial tty config as you did this morning (j14 jumper short,…
-
First, just a note about a message when start lives from a terminal, about an invalid effect:
```
# lives
LiVES 3.2.1-pre
Copyright 2002 - 2021 Gabriel Finch (salsaman+lives@gmail.com) and oth…
-
A number of formulae were deprecated despite having dependents. This goes
against our deprecation policy, and these formulae were undeprecated in order to
enable merging Homebrew/brew#12770.
We s…
-
Support is now merged and draft releases at v5.3.22 have been deployed for the Orin device-types
-
### Is there an existing issue for this bug?
- [X] I have searched the existing issues
### Required Troubleshooting Steps
- [X] I have followed these troubleshooting steps
- [X] I have tried…
-
Hi,
I compiled the image and it worked out of the box, no biggy, however it seems I cannot see the `/dev/ttyAMA0` device. It's a RPI hat plugged in (qibixx). Anyone an idea? I normally can access i…
-
Hi! I'm Igor.
We actually running tests on Pulpissimo!
Board: Digilent Nexys Video
SOC: Pulpissimo
We was able to synthetize Pulpissimo, install toolchain(Pulp Option), and install sdk.
i…