-
Hi all, my controller box is a CB28M1B-1 with a HS01B-1 keypad.
I disconnected the keypad and connected an ESP8266 as described with esphome.
Preset 1-3 and wakeup is working fine. But with up and d…
-
It appears that your voltage divider (two 10Kohm resistors) on the battery (12V) side can provide a voltage too high for the 5V 32u4 part. Not sure whether it is a typo on the schematic or that you tr…
misan updated
4 years ago
-
TLDR: Kiss FC is definitely missing a manual switch for Airmode activation. The current way of Airmode activation via Min Command is a) dangerous and b) not simple at all (although it easily could be …
rauar updated
4 years ago
-
**Describe the Bug**
I'm experimenting with the inertiaMatrix and boundingBox, and found this strange behavior.
In the following world, I've setup tree object (cubes), which are the same, but not pl…
-
Hello @askuric,
When I use _micros(), I get 75us for the loop of FOC:
t0=_micros();
motor.loopFOC();
motor.move();
t2=_micros();
Serial.print("...");
Serial.println(t2-t0);
The result i…
-
As Argos seems to not suffice all our needs, we have to move to a more promising simulation platform preferably with Thymio2 plugin and possibility for onboard camera intergation as this will be the i…
-
Perhaps this is a sensitive question, but I have a wheelchair frame that I want to CNC via the sharkbus - is there a good place in this project to start this process?
My understanding is that most …
-
## *What* is affected by this issue?
- [ ] qudi/hardware/motor/motor_stage_micos.py
- [ ] qudi/hardware/motor/motor_stage_pi.py
## *Where* on the platform does it affect?
- [ ] a…
-
Hello,
I tried to use the [pypilotmotorcontrollerwithrudder.ino](../blob/main/arduino%20sketch/pypilotmotorcontroller/pypilotmotorcontrollerwithrudder.ino)
It would help if a list of the libaries …
-
So when I connect your code and esp, if motor stalls, amps climb until explode driver and igbt.
How can I avoid that?