-
This is my first time reporting a bug so please excuse my improper ticket
I created a mod and have been testing it quite frequently until it gave me this when I tried to test it
Executing Gradl…
-
There's now a HAL published on crates.io: [`embedded-hal`][] ([Introduction blog post][brave-new-io]). :tada:
[`embedded-hal`]: https://docs.rs/embedded-hal/0.1.0/embedded_hal/
[brave-new-io]: htt…
-
This is a follwup to the [pre Foxy Message API review](https://github.com/ros2/common_interfaces/pull/86)
After validating that there's minimal usage of the original PointCloud we should hard depr…
-
I am working on a rather special case. It is a small robot (7cm in diameter), equipped with an array of infra sensors with a maximum distance of 5cm. The result is the LaserScan topic that has a resol…
-
Is there any planned support for the [particle photon](https://store.particle.io/collections/wifi/products/photon)? I know that #11176 and subsequent #12195 added support for the xenon, argon, and bo…
-
Hello and thank you for this great library!
I am using it with an ESP32 over UART and have a weird problem. After starting the measurement mode, it only takes some measurements (between 1 and 10) and…
-
How can we locate people in our region, that are under heavy smoke according to their meter, and do not contact us?
We recently received complaints about sensors measuring very high values of PM10.…
-
I've been exploring the factor types for 2D SLAM in the past days and cannot get get a working example using the Pose2Point2Bearing factor. The Solver seems to obtain a wrong solution but is very conf…
-
## Bug report
Many of the unit tests are not working on Windows, and tests that do work are not currently being ran. Attached is a log from AppVeyor if all short tests are enabled.
### Relevant…
-
I replaced the SDS011 in my Luftdaten dust sensor with a BME280. The BME280 shows the measured Temperature, rel. Humidity and Pressure data fine on the sensor webpage. Also these data ar shown on Open…