-
Hello :)
I am using a ESP32 with FreeRTOS and I have issues with heartbeats at a busload higher than 30 %.
I know the heartbeats are sent at the correct time because I already checked that with Vec…
-
Yesterday i discovered a peak of ~3500kwh during one hour.
It turns out that the sensor value received or parsed in to home assistant was 0 and then the following state was ~3500kwh from the cumulati…
-
Problem 1:
your program detects all the fans on the motherboard from one partition but does not see the fans from another partition. PHOTO 1
![image](https://user-images.githubusercontent.com/267707…
-
DLogger is not in good shape. Roger to refactor to bring to a polished state that does what we want it to.
Primary:
- easily set the frequency of sensors
- get what we need from said sensors
-
There are a wide range of data available:
- counts for several vehicle types
- plates matching
- traffic flow
- average speed
- congestion etc
-
**Is your feature request related to a problem? Please describe.**
I thought i could do a clock with motion sensors and pistons, but realized they don't detect moving blocks in general.
**Describe…
-
Hello, i discovered this project, looking for a solution to control the fans of my HP Proliant server using the ILO4 hacked version. I own a ML350 Gen9 equipped with 4 fans, 1 for the left PCI-e card …
-
### Initial request
**Rationale:**
Field campaigns with long duration drifting balloons are quite common/frequent. Sometimes high-value data are available in real-time and could be used in numerical…
-
All of my Sensors show 'unavailable' after I reboot the Home Assistant. It seemed like this was fixed in a prior bug patch release but appears not.
I usually have to remove the integration from eve…
-
I have implemented the drivers for the Melexis IR sensor MLX90614:
https://github.com/OpenAgriTech/LoRa_STM32/tree/MLX90614
At the moment, if detected, it is reported instead of the SHT Air Temp…