-
### Type
Other
### Explanation
Namely, ZCL_POWER_MW_ATTRIBUTE_TYPE, ZCL_AMPERAGE_MA_ATTRIBUTE_TYPE, ZCL_VOLTAGE_MV_ATTRIBUTE_TYPE, ZCL_ENERGY_MWH_ATTRIBUTE_TYPE
### Platform
all
### Platform Ver…
hasty updated
2 weeks ago
-
Hi Manio.
MPP Solar / Infinisolar MPI 10k hybrid inverter
pi@raspberrypi:~/skymax-demo/build $ sudo ./inverter_poller -1 -d
Thu Jun 2 11:13:12 2022 INVERTER: Debug set
Thu Jun 2 11:13:12 202…
-
Hi Xeroxxx :)
I just tested the dev-2, it's really nice!
However I will have some comments/suggestions:
1- I don't really understand the "realtime usage". For example on my raspberry I have 0…
-
The DIO board provides power to the external daughter boards via a 12V and a 5V rail.
The 5V rail can likely just come from some very high quality DC DC module, but the 12V rail deserves some thinkin…
-
| Answer some general questions first | |
|:------------------------------------------------------------------- |:------: |
| Are you my GitHub sponsor? | no 😢 |
| Did …
-
I´m using an esp8266 to send the battery information over TCP to the esp32-nmea2K. Messages are in nmea0183 format with XDR sentences
For example:
`$JCXDR,U,12.0,V,I,2.5,A,C,25.0,C,BAT1*hh`
I can…
-
**Suggestion**
I noticed that in your [excellent blog post explaining your project ](https://kylegabriel.com/projects/2020/06/automated-hydroponic-system-build.html) you explain how you use the 5V ra…
-
Hi,
I have the PZEM-017 with 100A.
I don't get any values displayed. Data is displayed on Windows, so hardware is okay.
What do I have to do to make your program work with the PZEM-017?
…
-
Hv batteries are always more than 24 cells in series. How did you get it to work with the BMS when it only have 24 outputs for cell balancing? Did you use active balancers and how did you wired them i…
-
Motivated by a desire to monitor my bilge pump in SignalK. But a standard should be applicable to other kinds of pumps (think domestic water, hydraulic, macerators) and to intermittent motors of all …
bobhy updated
2 years ago