-
```
What steps will reproduce the problem?
1. Change baudrate on GPS/emulator
2. Compile and flash
3. Text is scrambled when sending data to OSD
What is the expected output? What do you see instead?
…
-
Hi,
I used NUCLEO-F401RE example uart04.
Compilation and linkage work.
I flash my board.
openocd -f board/st_nucleo_f4.cfg -c "program uart04.gcc.thumb2.flash.elf verify reset exit"
What config I ne…
-
Hi!
I'm new with ROS and I ask sorry if mine is stupid question.
I'm using rosserial for publish via serial an Int16 from Arduino sketch running on STM32 F767ZI and send, via serial, another Int16…
-
Cannot detect baudrate on Ubuntu 13.10 using firmware `MarlinUltimaker-115200.hex`. Compiled from https://github.com/daid/Cura/commit/7591c803f0d63766b8fef0df6ee1a4a1e18c8c51.
Error message below (pr…
-
We will need to test the stability of this before release.
-
The maximum buadrate of telemetry is 115200. It should be increased to 921600 to match firmware.
in branch v1.0, it work well.
-
### Description of the issue
1.42.0-1 not starting.. Installed everything from scratch (removed z2mqtt, delete the folder from home assistant). I have the same error.
### Addon version
1.42.0-1
#…