-
### Describe the bug
ATS Should remain engaged when ALTN FADEC is selected
### Steps to reproduce
Go to overboost bar or Select ALTN fadec for any engine will disconnect ATS
### Expected behaviour…
-
### Describe the bug
Suspension not correctly in place
### Expected behaviour
When on the ground and gear extended, the suspension remains of level. It won't change position, but should be attached…
-
### Describe the bug
Fuel flow shoots up during engine start GE
### Expected behaviour
To rise calmly instead of going from 50 to 500 in a second
### Evidence
https://youtu.be/3wzS6fn8BA8?si=SiT…
-
### Describe the bug
When climing in VS mode and manual speed select mode (no wind), the ATS system hunts (from 88 N1 down to 77 N1) while trying to maintain the selected speed.
### Steps to reprodu…
-
### Describe the bug
Altitude alarm going off when selecting a new altitude
### Steps to reproduce
Climb to let's say 2000 feet when reached selected altitude select new altitude and hear the alar…
-
### Describe the bug
I noticed that the nose gear assembly is incomplete, missed all the hydraulic lines, wiring, strings, decals and hoses. Also the upper and lower torque links are not joined.
###…
-
### Describe the bug
Details for the alternate airport such as ETA, distance and Fuel all show as 0
### Steps to reproduce
Enter Alternate airfield in MCDU
### Expected behaviour
Would Expect to …
-
### Describe the bug
Thrust limit is not automatically switched to CLB when climbing in PROF. Manual selection of limit does not increase thrust in CLB THRUST mode
### Steps to reproduce
Reac…
-
### Describe the bug
On an ILS, once glidepath captured, when setting the missed approach altitude it shows as a preselected altitude rather than selected.
### Steps to reproduce
Fly an ILS and at …
-
### Describe the bug
When changing the INIT Page altitudes, AFS commands climb thrust and pitches upwards even though AFS ALT window value has not changed
### Steps to reproduce
Establish cruise wi…