-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please be very s…
-
## Bug report
**Issue details**
./waf copter causes OMNIBUSF7V2-bdshot fail to link compiles fine but fails to link OMNIBUSF7V2 links okay MatekF765-SE links ok
OSX gcc etc all up to date
_Pl…
-
Ardupilot Loiter Brake
The braking effect is not good. Can you optimize or add position control
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please be very s…
-
## Bug report
**Issue details**
Using ROS-SITL, I detected using dronekit to set the velocity in the _vehicle.message_factory.set_position_target_local_ned_encode_, that the drone starts rotatin…
-
Just so I know it is not a problem with the server, I used the paho python library and this script works no problem and the messages are received.
```import paho.mqtt.client as mqtt
import time
c…
-
## Bug report
On Pi 4 Board, I can read PPM normally.
I have all sensors and PCA9685 running on breadboard + benchtop. I'm working on my own board/solution, so this issue is very strange, as Pi4…
-
Hello everyone, i’m sending telemetry data from my navio2+raspberrypi3 to my android device (qgroundcontrol) on tcp protocol, when i sent the video over 4g on udp protocol it greyed out and pixelate…
-
## Bug report
**Issue details**
The Vented Gauge type measures zero when pressure on both sides is equal. Currently the (enclosure internal pressure) offset is set to a constant value (standard …
-
**IF YOU DON'T REMOVE THESE FOUR LINES, THEN YOUR REPORT WILL BE CLOSED AUTOMATICALLY**
Questions and user problems should be directed at the forum (http://discuss.ardupilot.org)
_**Please be very s…