-
I think Wiki is a good start as well as `README.TXT`.
https://github.com/Optiboot/optiboot/wiki/CompilingOptiboot
https://github.com/Optiboot/optiboot/blob/master/optiboot/bootloaders/optiboot/READM…
-
### Describe the problem
The Arduino language features are not available after startup.
### To reproduce
- Have no attached boards,
- Start IDE2,
- Select `Arduino Uno` board (can be any),…
-
Unfortunately I don't have an engine running Speeduino yet, but I made some changes in the interrupt code on sensors.h.
```
ISR(ADC_vect)
{
byte nChannel = ADMUX & 0x07;
int result = ADCL | (…
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
The `-F` flag is meant to proceed even though seemingly fatal errors are present.
That does not work anymore.
One of the most important cases where it needs to be used is an STK500 that has been mis…
-
The current "avrdude.conf" has the following description in three places: ".xmega", ".avr8x", and ".avrdx".
```
memory "data"
# SRAM, only used to supply the offset
offset …
-
Now that Avrdude 7.1 has been released, it's time to look into how MightyCore, MegaCore, MiniCore, and MajorCore can migrate to the superior [Urboot](https://github.com/stefanrueger/urboot) bootloader…
-
I'm currently using Optiboot with a baudrate of 115.200bps on a board with 14.7456MHz.
Using AVRDUDESS (avrdude gui) on Windows, I can connect to it no problem.
But when flashing urboot, I can't…
-
Here's a list I've generated by going through the adtf files for ATmega and ATtinys:
These should probably be added to avrdude.conf.in sometime...
```
Missing part: Same signature as:
ATmega1280…
-
### Describe the Bug
I tried to compile the default niu mini, and got the following output:
```
Ψ Compiling keymap with make --jobs=1 kbdfans/niu_mini:default
QMK Firmware 0.21.6
Making kbdfa…