-
I am testing old ollama bin file with llama2:7b model on Intel Flex 170 GPU:
I have followed new ipex-llm documentation for driver install and rest steps, but when i am running ollama serve it doesn'…
-
Hello,
Chipyard support rocket with NVDLA, but this project only support VCU118. I want to implement this rocket with NVDLA project on other FPGA prototyping paltform. Which means I can't use Xilinx …
-
https://www.phoronix.com/news/AMD-Ryzen-AI-Open-Source-Demo
AMD Has Open-Source Ryzen AI Demo Code - But Only For Windows
-
Hey guys!
I dont have a de10soc , but i have a de1soc(board).
I would like to know if anyone has tried to implement this fantastic work in it.
Do you think it is possible to implement on the de1soc…
-
### Error Description
I am encountering the error, `Native API returns: -30 (PI_ERROR_INVALID_VALUE)`, when trying to run llama.cpp with the latest IPEX-LLM, following the official quickstart guide o…
-
Hi,
thanks for this project - I've managed to get Linux booting on a constrained Board (ECP5 based, https://github.com/zeldin/RVCop64, tweaked to use the VexRiscV-SMP CPU) - see attached bootlog.
I …
-
what options differ?
for version 4.13.3 and version 4.15:
* download source code
* make tinyconfig
* get the .config
compare the two .config and then hopefully explain this sudden incre…
-
I'm using (64-bit) RocketChip as part of the LiteX SoC environment, which provides DRAM controllers of varying AXI port width, depending on the specifics of individual FPGA boards it's being built for…
-
When the SoC is configured with a crossover UART, it could be useful to create a /dev/ttyX device on the Host to access the UART of the SoC directly.
-
> At the moment, I'm not aware of a good way to tell the firmware/BIOS to simply jump to the first RAM address and start executing the side-loaded boot.bin which is now located there. Although that sh…